Ultra-low power, high performance, sub-1GHz transceiver

Download datasheet Order Direct

Product overview

Description

The S2-LP is a high performance ultra-low power RF transceiver, intended for RF wireless applications in the sub-1 GHz band. It is designed to operate in both the license-free ISM and SRD frequency bands at 433, 512, 868 and 920 MHz, but can also be programmed to operate at other additional frequencies in the 413-479 MHz, 452-527 MHz, 826-958 MHz, 904-1055 MHz bands.

The S2-LP supports different modulation schemes: 2(G)FSK, 4(G)FSK, OOK and ASK. The air data rate is programmable from 0.1 to 500 kbps.

The S2-LP can be used in systems with channel spacing down to 1 kHz enabling the narrow band operations.

The S2-LP shows an RF link budget higher than 140 dB for long communication ranges and meets the regulatory requirements applicable in territories worldwide, including Europe, Japan, China and the USA.

  • All features

    • Frequency bands:
      • 413-479 MHz (S2-LPQTR)
      • 452-527 MHz (S2-LPCBQTR)
      • 826-958 MHz (S2-LPQTR)
      • 904-1055 MHz (S2-LPCBQTR)
    • Modulation schemes:
      • 2(G)FSK, 4(G)FSK
      • OOK, ASK
    • Air data rate from 0.1 to 500 kbps
    • Ultra-low power consumption:
      • 7 mA RX
      • 10 mA TX @ +10 dBm
    • Excellent performance of receiver sensitivity: down to -130 dBm
    • Excellent receiver selectivity and blocking
    • Programmable RF output power up to +16 dBm
    • Programmable RX digital filter
    • Programmable channel spacing
    • Fast start-up and frequency synthesizer settling time
    • Automatic frequency offset compensation, AGC and symbol timing recovery
    • More than 145 dB RF link budget
    • Battery indicator and low battery detector
    • RX and TX 128 bytes FIFO buffers
    • 4-wire SPI interface
    • Automatic packet acknowledgment and retransmission
    • Embedded timeout protocol engine
    • Excellent receiver selectivity (> 80 dB @ 2 MHz)
    • ST companion integrated balun/filter chips are available
    • Antenna diversity algorithm
    • Fully integrated ultra-low power RC oscillator
    • Wake-up driven by internal timer or external event
    • Digital real time RSSI
    • Flexible packet length with dynamic payload length
    • Programmable preamble and SYNC word quality filtering and detection
    • Embedded CSMA/CA engine based on listen-before-talk systems
    • IEEE 802.15.4g hardware packet support with whitening, FEC, CRC and dual SYNC word detection
    • Wireless M-BUS supported
    • KNX-RF supported
    • Enables operations in the SIGFOX™ and MONARCH networks
    • Suitable to build systems targeting:
      • Europe: ETSI EN 300 220, category 1.5 natively compliant, ETSI EN 303 131
      • US: FCC part 15 and part 90
      • Japan: ARIB STD T67, T108
      • China: SRRC
    • Operating temperature range: -40 °C to +105 °C

You might also like...

All tools & software

    • Part number
      Status
      Description
      Type
      Supplier

      SIGFOX-USB2-C

      Active

      Baseboard with a SIGFOX-DEV1-C mounted on it

      Development boards from partners XoverIoT
      SIGFOX-USB2-C

      Description:

      Baseboard with a SIGFOX-DEV1-C mounted on it
    • Part number
      Status
      Description
      Type
      Supplier

      EMBETECH embeNET

      Active

      IPv6-based wireless mesh network stack with large-scale communication capabilities

      Embedded software from partners EMBETECH
      EMBETECH embeNET

      Description:

      IPv6-based wireless mesh network stack with large-scale communication capabilities
    • Part number
      Status
      Description
      Type
      Supplier

      STSW-S2LP-DK

      Active

      Evaluation SW package based on S2-LP

      Evaluation tool software ST
      STSW-S2LP-DK

      Description:

      Evaluation SW package based on S2-LP

      STSW-S2LP-SFX-DK

      Active

      Evaluation SW package based on S2-LP

      Evaluation tool software ST
      STSW-S2LP-SFX-DK

      Description:

      Evaluation SW package based on S2-LP
    • Part number
      Status
      Description
      Type
      Supplier

      RC-S2LP-XXX

      Active

      LP sub 1GHz Xchannels Radio Transceiver modules

      Hardware integrated devices from partners Radio Controlli
      RC-S2LP-XXX

      Description:

      LP sub 1GHz Xchannels Radio Transceiver modules

      RC-S2LP-XXX-HA

      Active

      ULP sub 1GHz Xchannels Radio Transceiver modules

      Hardware integrated devices from partners Radio Controlli
      RC-S2LP-XXX-HA

      Description:

      ULP sub 1GHz Xchannels Radio Transceiver modules

      RC-SPIRIT2-XXX

      Active

      ULP sub 1GHz Xchannels Radio Transceiver module

      Hardware integrated devices from partners Radio Controlli
      RC-SPIRIT2-XXX

      Description:

      ULP sub 1GHz Xchannels Radio Transceiver module

      SIGFOX-MOD1-C / -E

      Active

      Ultra LP modules for sensor node apps/chip antenna

      Hardware integrated devices from partners XoverIoT
      SIGFOX-MOD1-C / -E

      Description:

      Ultra LP modules for sensor node apps/chip antenna

      SIGFOX-MOD2-C / -E

      Active

      Ultra LP Uplink-Only modules for sensor node apps

      Hardware integrated devices from partners XoverIoT
      SIGFOX-MOD2-C / -E

      Description:

      Ultra LP Uplink-Only modules for sensor node apps

      SWAN2

      Active

      Wall or pole mounted, battery operated gateway

      Hardware integrated devices from partners WEPTECH elektronik
      SWAN2

      Description:

      Wall or pole mounted, battery operated gateway
    • Part number
      Status
      Description
      Type
      Supplier

      MakeSense - 221e engineering services

      Active

      MakeSense is a program for companies that need help with implementing wireless connectivity and inertial, environmental or biosignal sensing

      Design services from partners 221e
      MakeSense - 221e engineering services

      Description:

      MakeSense is a program for companies that need help with implementing wireless connectivity and inertial, environmental or biosignal sensing

      STACKFORCE Firmware development and system integration

      Active

      Development services covering FW development and system integration

      Engineering services from partners STACKFORCE
      STACKFORCE Firmware development and system integration

      Description:

      Development services covering FW development and system integration

      Sigfox Modules HW-SW customization

      Active

      Sigfox module HW services and embedded FW

      Engineering services from partners XoverIoT
      Sigfox Modules HW-SW customization

      Description:

      Sigfox module HW services and embedded FW

      Training on antennas for Sigfox and subGHz

      Active

      Introduction on frequently used antenna

      Training from partners XoverIoT
      Training on antennas for Sigfox and subGHz

      Description:

      Introduction on frequently used antenna
    • Part number
      Status
      Description
      Type
      Supplier

      STDES-MONARCH

      Active

      Sigfox Monarch reference design based on S2-LP and BlueNRG-2

      Wired ST
      STDES-MONARCH

      Description:

      Sigfox Monarch reference design based on S2-LP and BlueNRG-2

      STEVAL-FKI001V1

      Active

      Dual radio BLE and Sub-1GHz development kit for Sigfox™ and LPWAN protocols with BlueNRG-1 and S2-LP

      Wireless ST
      STEVAL-FKI001V1

      Description:

      Dual radio BLE and Sub-1GHz development kit for Sigfox™ and LPWAN protocols with BlueNRG-1 and S2-LP

      STEVAL-FKI433V1

      NRND

      Sub-1GHz transceiver development kit based on S2-LP

      Wireless ST
      STEVAL-FKI433V1

      Description:

      Sub-1GHz transceiver development kit based on S2-LP

      STEVAL-FKI433V2

      Active

      Sub-1GHz (430-470 MHz) transceiver development kit based on S2-LP

      Wireless ST
      STEVAL-FKI433V2

      Description:

      Sub-1GHz (430-470 MHz) transceiver development kit based on S2-LP

      STEVAL-FKI512V1

      Active

      Sub-1GHz (452-527 MHz) transceiver development kit based on S2-LP

      Wireless ST
      STEVAL-FKI512V1

      Description:

      Sub-1GHz (452-527 MHz) transceiver development kit based on S2-LP

      STEVAL-FKI868V1

      NRND

      Sub-1GHz transceiver development kit based on S2-LP

      Wireless ST
      STEVAL-FKI868V1

      Description:

      Sub-1GHz transceiver development kit based on S2-LP

      STEVAL-FKI868V2

      Active

      Sub-1GHz (860-940 MHz) transceiver development kit based on S2-LP

      Wireless ST
      STEVAL-FKI868V2

      Description:

      Sub-1GHz (860-940 MHz) transceiver development kit based on S2-LP

      STEVAL-FKI915V1

      Active

      Sub-1GHz transceiver development kit based on S2-LP

      Wireless ST
      STEVAL-FKI915V1

      Description:

      Sub-1GHz transceiver development kit based on S2-LP
    • Part number
      Status
      Description
      Type
      Supplier

      X-NUCLEO-S2868A1

      NRND

      Sub-1 GHz 868 MHz RF expansion board based on S2-LP radio for STM32 Nucleo

      STM32 ODE Connect HW ST
      X-NUCLEO-S2868A1

      Description:

      Sub-1 GHz 868 MHz RF expansion board based on S2-LP radio for STM32 Nucleo

      X-NUCLEO-S2868A2

      Active

      Sub-1 GHz 868 MHz RF expansion board based on S2-LP radio for STM32 Nucleo

      STM32 ODE Connect HW ST
      X-NUCLEO-S2868A2

      Description:

      Sub-1 GHz 868 MHz RF expansion board based on S2-LP radio for STM32 Nucleo

      X-NUCLEO-S2915A1

      Active

      Sub-1 GHz 915 MHz RF expansion board based on S2-LP radio for STM32 Nucleo

      STM32 ODE Connect HW ST
      X-NUCLEO-S2915A1

      Description:

      Sub-1 GHz 915 MHz RF expansion board based on S2-LP radio for STM32 Nucleo
    • Part number
      Status
      Description
      Type
      Supplier

      STSW-BNRG-S2LP

      Active

      STSW-BNRG-S2LP evaluation software package based on BlueNRG-1 and S2-LP

      Wireless Connectivity Software ST
      STSW-BNRG-S2LP

      Description:

      STSW-BNRG-S2LP evaluation software package based on BlueNRG-1 and S2-LP

EDA Symbols, Footprints and 3D Models

STMicroelectronics - S2-LP

Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.

Please select one model supplier :

Symbols

Symbols

Footprints

Footprints

3D model

3D models

Quality and Reliability

Part Number Marketing Status Package Grade RoHS Compliance Grade Material Declaration**
S2-LPCBQTR
Active
QFN-24L Industrial Ecopack3
S2-LPQTR
Active
QFN-24L Industrial Ecopack3

S2-LPCBQTR

Package:

QFN-24L

Material Declaration**:

PDF XML

Marketing Status

Active

Package

QFN-24L

Grade

Industrial

RoHS Compliance Grade

Ecopack3

S2-LPQTR

Package:

QFN-24L

Material Declaration**:

PDF XML

Marketing Status

Active

Package

QFN-24L

Grade

Industrial

RoHS Compliance Grade

Ecopack3

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.

Sample & Buy

Swipe or click the button to explore more details Don't show this again
Part Number
Marketing Status
Budgetary Price (US$)*/Qty
Order from ST
Order from distributors
Package
Packing Type
RoHS
Country of Origin
ECCN (US)
ECCN (EU)
Operating temperature (°C)
min
max
S2-LPCBQTR
Available at distributors

Distributor availability of S2-LPCBQTR

Distributor Name
Region Stock Min. Order Third party link

Distributor reported inventory date:

No availability of distributors reported, please contact our sales office
S2-LPQTR
Available at distributors

Distributor availability of S2-LPQTR

Distributor Name
Region Stock Min. Order Third party link

Distributor reported inventory date:

No availability of distributors reported, please contact our sales office

S2-LPCBQTR Active

Budgetary Price (US$)*/Qty:
-
Package:
Packing Type:
RoHS:
Country of Origin:
ECCN (US):
ECCN (EU):

Part Number:

S2-LPCBQTR

Operating Temperature (°C)

Min:

Max:

Distributor Name

Distributor reported inventory date:

S2-LPQTR Active

Budgetary Price (US$)*/Qty:
-
Package:
Packing Type:
RoHS:
Country of Origin:
ECCN (US):
ECCN (EU):

Part Number:

S2-LPQTR

Operating Temperature (°C)

Min:

Max:

Distributor Name

Distributor reported inventory date:

Swipe or click the button to explore more details Don't show this again

(*) Suggested Resale Price (USD) per defined quantity for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors