STBC02

批量生产

配有LDO、负载开关和复位发生器的线性锂离子电池充电器

下载数据手册 Order Direct

产品概述

描述

STBC02属于高度集成式电源管理装置,其中嵌入了线性电池充电器、150 mA LDO、2个SPDT负载开关、智能复位/看门狗块以及保护电路模块(PCM),可避免电池在故障状态下受损。

STBC02使用CC/CV算法为电池充电;可通过专用电阻独立设定快速充电和预充电电流。 会默认将终止电流设为已设定的快速充电电流值的5%,但也可改为其它值。 同样,电池浮动电压值也可通过程序设定,最高可设为4.45 V。

STBC02还具有充电器使能输入,可随时停止充电过程。

如果IN引脚未连接至有效电源(电池模式),STBC02会自动切断与电池的电源连接。

可通过外部电路(NTC热敏电阻)检测电池温度过低/过高的情况。

STBC02在装运模式下仅会从已连接电池中消耗不足10 nA的电流,因此可在最终产品保存期限内最大限度地延长电池使用寿命。 提供30um间距的覆晶封装封装。

  • 所有功能

    • 使用CC/CV算法和充电终止功能为单电池锂离子电池充电
    • 快速充电电流高达450mA
    • 预充电电流为1 mA到450 mA
    • 可调浮动电压最高可达到4.45 V
    • 集成式低静态LDO稳压器
    • 自动电源路径管理
    • 自动再次充电功能
    • 嵌入式保护电路模块(PCM)具有电池过度充电保护、电池过度放电保护以及电池电流过载保护功能
    • 出于安全方面的考虑,可通过充电超时终止充电过程
    • 装运模式功能可在过度放电的情况下允许电池小幅漏电
    • 过度放电和关机模式下电池漏电量极低
    • 充电/故障状态输出
    • 电池电压引脚允许进行外部测量
    • 两个3 Ω SPDT负载开关
    • 由USB检测触发的复位发生器
    • SWIRE可实现对STBC02功能的控制
    • 提供30、400 um间距的覆晶封装
    • 在最重要的引脚上采用稳固的±4 kV HBM、ESD保护

您可能还会喜欢...

The current status of a product:
Active: Product is in volume production
Evaluation: Product is under characterization. Limited Engineering samples available
Preview: Product is in design stage
Target: Product is in design feasibility stage.No commitment taken to produce
Proposal: Marketing proposal for customer feedback.No commitment taken to design or produce
NRND: Not Recommended for New Design.Product is in volume production only to support customers ongoing production.
Marketing description of the package type.Compliancy of the device with industry requirement domains (IRD)The RoHS status of a product:
ECOPACK 1: Initial grade to identify European RoHS compliant products.
ECOPACK 2: New grade to identify brominated chlorinated and antimony oxide flame retardant free products.
ECOPACK 3: Halogen free RoHS exemptions free products.
(*): ECOPACK 2 version available upon request.
(**): Some versions still existing in ECOPACK 1 or not compliant.
The current status of a product:
Active: Product is in volume production
Evaluation: Product is under characterization. Limited Engineering samples available
Preview: Product is in design stage
Target: Product is in design feasibility stage.No commitment taken to produce
Proposal: Marketing proposal for customer feedback.No commitment taken to design or produce
NRND: Not Recommended for New Design.Product is in volume production only to support customers ongoing production.
Budgetary PriceMarketing description of the package type.Storage method used to contain product.Main country of assembly or fabrication of the product.ECCNs are five character alpha-numeric designations used on the Commerce Control List to identify dual-use items for export control purposes. ECCNs are five character alpha-numeric designations used on the Commerce Control List to identify dual-use items for export control purposes.The value as specified by level (minTypMax) of the ambient temperature (in Cel) in which this item was designed to operate.The value as specified by level (minTypMax) of the ambient temperature (in Cel) in which this item was designed to operate.The value as specified by level (minTypMax) of the ambient temperature (in Cel) in which this item was designed to operate.