FDA803S

Active
Save to myST

1 x 10 W class D digital input automotive power amplifier with diagnostics, wide voltage operation range for car audio and telematics

Download databrief
Order Direct
Overview

Product overview

Description

Description

The FDA803S is the new ST single channel class-D audio amplifier, specifically designed for automotive applications. The FDA803S integrates a 24-bit, 100 dB DAC conversion and PWM class-D output stage with feedback before LC filter. This configuration enables the design of a compact and inexpensive application.

The FDA803S supports I2S and TDM digital bit stream up to 16CH with several sampling frequencies from 8 kHz up to 96 kHz. FDA803S embeds a complete diagnostic in play to support the most demanding OEM requirements in terms of speaker control and system robustness/ reliability.

The FDA803S supports start stop cranking down to 3.3 V and it is available in a very compact and thin QFN 5x5 package. Thus the FDA803S is suitable for any level of automotive application especially e-Call and Telematics.

  • All features

    • AEC-Q100 qualified
    • Integrated 100 dB D/A conversion
    • I2S and TDM digital input (up to 16CH TDM)
    • Selectable input sample rate frequency (8/16/32/44.1/48/96 kHz)
    • Wide supply operating range: 3.3 V - 18 V
    • PWM frequency switching selectable by I2C
      • 352.8 kHz, 384kHz, 411.6 kHz, 448 kHz
    • 2 I2C addresses
    • MOSFET power outputs
      • Typ 10 W 4 Ω at 14.4 V, 1 kHz THD = 1%
      • Typ 5 W 8 Ω at 14.4 V, 1 kHz THD = 1%
    • Noise: 38 μV A-weighted: 20 kHz
    • 8 Ω, 4 Ω driving capability
    • Input amplitude limiter (configurable through I2C)
    • I2C full configurability and diagnostic
      • Startup diagnostic
      • Input voltage amplitude limiter function (configurable through I2C)
      • 4 x Thermal warning
      • DC diagnostic
      • OCP protection scheme configurable
      • Mute time configuration
    • Capability to run complete diagnostic in play
      • Configurable Clipping Detector
      • One of the Thermal Warnings
      • Over Current Protection
      • Open Load detection
      • High voltage mute
    • 2 CD/Diag pin
    • Integrated ESD and short circuit protection
    • QFN32 wettable flanks
    • Tested according to CISPR 25 - Class V (Fourth edition)

You might also like...

EVAL-FDA903S

EVAL-FDA903S evaluation board for FDA903S and FDA803S

Products

Search History

Bookmark

Please log in  to show your saved searches.

▼

Did you know?

Please provide email

Please enter code

Congratulations!

Simple subscription

Congratulations!

x

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

Invalid code, please check the code sent to your email address and validate again. In case you did not receive any code please select 'I did not receive code'

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

Please review our Privacy Statement that describes how we process your profile information and how to assert your personal data protection rights

You are now subscribed to
- FDA803S

You can re-use the validation code to subscribe to another product or application.

Sorry, there was a problem on our servers. Please try again.
The current status of a product:
Active: Product is in volume production
Evaluation: Product is under characterization. Limited Engineering samples available
Preview: Product is in design stage
Target: Product is in design feasibility stage.No commitment taken to produce
Proposal: Marketing proposal for customer feedback.No commitment taken to design or produce
NRND: Not Recommended for New Design.Product is in volume production only to support customers ongoing production.Marketing description of the package type.Compliancy of the device with industry requirement domains (IRD)The RoHS status of a product:
ECOPACK 1: Initial grade to identify European RoHS compliant products.
ECOPACK 2: New grade to identify brominated chlorinated and antimony oxide flame retardant free products.
ECOPACK 3: Halogen free RoHS exemptions free products.
(*): ECOPACK 2 version available upon request.
(**): Some versions still existing in ECOPACK 1 or not compliant.The current status of a product:
Active: Product is in volume production
Evaluation: Product is under characterization. Limited Engineering samples available
Preview: Product is in design stage
Target: Product is in design feasibility stage.No commitment taken to produce
Proposal: Marketing proposal for customer feedback.No commitment taken to design or produce
NRND: Not Recommended for New Design.Product is in volume production only to support customers ongoing production.Budgetary PriceMarketing description of the package type.Storage method used to contain product.Main country of assembly or fabrication of the product.ECCNs are five character alpha-numeric designations used on the Commerce Control List to identify dual-use items for export control purposes. ECCNs are five character alpha-numeric designations used on the Commerce Control List to identify dual-use items for export control purposes.The value as specified by level (minTypMax) of the ambient temperature (in Cel) in which this item was designed to operate.The value as specified by level (minTypMax) of the ambient temperature (in Cel) in which this item was designed to operate.The value as specified by level (minTypMax) of the ambient temperature (in Cel) in which this item was designed to operate.