ST25DV02K-W2

Active
Design Win Education
Save to myST

Dynamic NFC/RFID tag IC with two PWM outputs and 2-Kbit EEPROM

Download datasheet

Product overview

Description

The ST25DV02K-W1/2 is an ISO 15693 and NFC Forum Type 5 tag, with one or two pulse width modulation (PWM) outputs and 2 Kbits of electrically erasable programmable memory (EEPROM).

It offers two interfaces. The first delivers up to 2x independent PWM output signals and the second is an RF link activated by the received carrier electromagnetic wave.

The PWM outputs are configured at boot time, and can be updated live through RF link. RF and PWM are independently powered and can work in stand-alone mode.

The ST25DV02K-W1/2 contains 256 bytes (64 blocks) of memory for User data. This memory is accessible through the RF interface, following ISO/IEC 15693 or NFC Forum Type 5 Tag recommendations.

The device is based on technology and design solutions for which there are pending patents.

  • All features

    • Pulse width modulation outputs
      • Two independent outputs: 1x PWM output on ST25DV02K-W1, 2x PWM outputs on ST25DV02K-W2
      • From 488 Hz to 31250 Hz
      • 62.5 ns pulse width resolution: from 15-bit resolution at 488 Hz to 9-bit resolution at 31.25 kHz
      • Accuracy: ±10% over temperature range
      • No need for external oscillator
      • Supply voltage from 1.8 V to 5.5 V, independent from contactless interface
      • Independent push-pull outputs
        • Up to 4 mA drive capability per output
        • Adjustable output drive for low power and low noise application
      • Live update of PWM parameters controlled by contactless interface
    • Contactless interface
      • Based on ISO/IEC 15693 and NFC Forum Type 5 Tag
      • Supports all ISO/IEC 15693 modulations, coding, sub-carrier modes and data rates
      • Single and multiple blocks read
      • Internal tuning capacitance: 28.5 pF
    • Memory
      • 2-Kbit of EEPROM
      • Accessible in blocks of 4x bytes
      • 5 ms typical write time (one block)
      • Data retention: 40 years
      • Write cycles endurance: 100k write cycles at 85 °C
    • Data protection
      • Up to four independent areas, including the PWM control area, with flexible protection mechanism based on 32/64-bit passwords
      • System configuration: write protection by 32-bit password
      • TruST25 digital signature mechanism for authentication
    • Temperature range
      • From -40 °C to +85 °C (contactless interface)
      • From -40 °C to +105 °C (PWM interface)
    • Package
      • SO8N and TSSOP8
      • ECOPACK2 (RoHS compliant)
    Read more Read less

eDesignSuite

eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.

Power Management Design Center

Thermal-electrical Simulators for Components

Signal Conditioning Design Tool

NFC/RFID Calculators

Choose design tool:
Power Management Design Center

Power Supply Design Tool

• SMPS design, by topology, by type and by product
• PFC design with analog and digitial control
• Supports various PCB configurations
Choose type:
DC/DC
AC/DC
Solar Battery Charger
Power Management Design Center

LED Lighting Design Tool

• Handles AC-DC and DC-DC design in common topologies
• Displays interactive and annotated schematic
• Provides current/voltage graphs, Bode plots, efficiency curves and power-loss data
Choose type:
DC/DC
AC/DC
Power Management Design Center

Digital Power Workbench

• Provides a step-by-step optimized design of power section and control loop
• Generates the STM32Cube embedded software package for custom applications and allows firmware project generation, compatible with multiple STM32 IDEs
Power Management Design Center

Power Tree Designer

• Specify input/output power for each node in the tree
• Check for consistency
• Design each individual node
Choose design tool:
Thermal-electrical Simulators for Components

AC Switches Simulator

• Select ratings and application waveforms
• Get junction temperature and blocking voltage graphs
• Search and sort suitable devices
Thermal-electrical Simulators for Components

Rectifier Diodes Simulator

• Select ratings and application waveforms
• Estimate power losses
• Search and sort suitable devices
Thermal-electrical Simulators for Components

STPOWER Studio

• Supports long mission profiles
• Provides power loss and temperature graphs
• Helps define heatsink thermal properties
Thermal-electrical Simulators for Components

Twister Sim

• Help select the right ViPOWER Automotive power device
• Supports load-compatibility, wiring harness optimization, fault condition impact and diagnostic analysis
• Supports various PCB configurations
Thermal-electrical Simulators for Components

TVS Simulator

• Specify system ratings and surge waveform
• Search and sort suitable devices
Thermal-electrical Simulators for Components

Estimate

• Build simple schematics and firmware inputs in minutes
• Quickly generate reliable estimates of battery life, system power consumption and bill of materials costs
Choose design tool:
Signal Conditioning Design Tool

Active Filters

• Handles multi-stage-designs and common topologies
• Returns circuit component values
• Provides gain, phase and group delay graphs
• Low Pass, High Pass and Band Pass
Signal Conditioning Design Tool

Comparators

• Handles most common configurations
• Returns circuit components values
• Provides I/O signal waveforms
• Inverting, Non Inverting, Window
Signal Conditioning Design Tool

Low side Current Sensing

• Returns circuit component values
• Provides current error graphs
Signal Conditioning Design Tool

High side Current Sensing

• Provides current error graphs.
• Help to select the right High side current sensing and shunt devices.
Choose design tool:
NFC/RFID Calculators

NFC Inductance

• Input geometry and substrate properties
• Get antenna impedance
NFC/RFID Calculators

UHF Link Budget

• Enter forward and reverse link characteristics
• The tool returns link budget estimate
NFC/RFID Calculators

NFC Tuning Circuit

• Enter antenna parameter and matching target
• Select the topology of the matching network
• The tool returns component values for the desired design targets

You might also like...

STSW-ST25R-LIB

ST25 embedded NFC library for ST25 reader and tag products

STSW-ST25001

Application executable of the NFC Tap Android app for ST25 product family

STSW-ST25SDK001

Software Development Kit for ST25 Tags and Dynamic Tags

Recommended for you

EDA Symbols, Footprints and 3D Models

STMicroelectronics - ST25DV02K-W2

Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.

Please select one model supplier :

Start your design with UltraLibrarian
Start your design with SamacSys
Symbols

Symbols

Footprints

Footprints

3D model

3D models

Quality and Reliability

Part Number Marketing Status Package Grade RoHS Compliance Grade Material Declaration**
ST25DV02K-W2R8S3
Active
SO8 Industrial Ecopack2
ST25DV02K-W2R8T3
Active
TSSOP-8L Industrial Ecopack2

ST25DV02K-W2R8S3

Package:

SO8

Material Declaration**:

More Info

Marketing Status

Active

Package

SO8

Grade

Industrial

RoHS Compliance Grade

Ecopack2

ST25DV02K-W2R8T3

Package:

TSSOP-8L

Material Declaration**:

PDF XML
More Info

Marketing Status

Active

Package

TSSOP-8L

Grade

Industrial

RoHS Compliance Grade

Ecopack2

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.

Sample & Buy

(*) Suggested Resale Price (USD) per defined quantity for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors

Products

Search History

Bookmark

Please log in  to show your saved searches.

▼

Did you know?

Please provide email

Please enter code

Congratulations!

Simple subscription

Congratulations!

x

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

Invalid code, please check the code sent to your email address and validate again. In case you did not receive any code please select 'I did not receive code'

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

Please review our Privacy Statement that describes how we process your profile information and how to assert your personal data protection rights

You are now subscribed to
- ST25DV02K-W2

You can re-use the validation code to subscribe to another product or application.

Sorry, there was a problem on our servers. Please try again.