ST25DV64KC

Quality & Reliability

Get Started

Partner products

Sales Briefcase

Please enter your desired search query and search again

Product overview

Description

The ST25DV04KC, ST25DV16KC, and ST25DV64KC devices (hereinafter referred collectively to as ST25DVxxKC) are NFC RFID tags offering, respectively, 4, 16, and 64‑Kbit of electrically erasable programmable memory (EEPROM). These devices feature two interfaces: the first one is an I²C serial link that can be operated from a DC power supply, the second one is an RF link activated when the device acts as a contactless memory powered by the received carrier electromagnetic wave.

In I²C mode, the user memory contains 512 (ST25DV04KC), 2048 (ST25DV16KC), or 8192 (ST25DV64KC) bytes, which can be split in four flexible and protectable areas.

In RF mode, following ISO/IEC 15693 or NFC Forum Type 5 recommendations, the user memory contains 128 (ST25DV04KC), 512 (ST25DV16KC), or 2048 (ST25DV64KC) blocks of 4 bytes, which can be split in four flexible and protectable areas.

These devices offer a fast transfer mode between the RF and contact interfaces, thanks to a 256 bytes volatile buffer (also called mailbox). In addition, the GPO pin provides data about incoming events, like RF field detection, RF activity in progress, or mailbox message availability. An energy harvesting feature is also available.

All features
Includes ST state-of-the-art patented technology

I²C interface

Two-wire I²C serial interface supports 1 MHz protocol

Single supply voltage: 1.8 to 5.5 V

Multiple byte programming (up to 256 bytes)

Configurable I²C target address

Contactless interface

Based on ISO/IEC 15693

NFC Forum Type 5 tag certified by the NFC Forum

Support of all ISO/IEC 15693 modulations, coding, subcarrier modes and data rates

Custom fast read access up to 53 Kbit/s

Single and multiple blocks read (same for extended commands)

Single and multiple (up to four) blocks write (same for extended commands)

Internal tuning capacitance: 28.5 pF

Memory

Up to 64 Kbit of EEPROM (depending on version)

I²C interface accesses bytes

RF interface accesses blocks of 4 bytes

Write time:
From I²C: typical 5 ms for 1 up to 16 bytes
From RF: typical 5 ms for one block

Data retention: 40 years

Write cycles endurance:
1 million at 25 °C
600k at 85 °C
500k at 105 °C
400k at 125 °C

Fast transfer mode

Fast data transfer between I²C and RF interfaces

Half-duplex 256 bytes dedicated buffer

Energy harvesting

Analog output pin to power external components
Data protection

User memory: one to four configurable areas, protectable in read and/or write by three 64-bit passwords in RF and one 64‑bit password in I²C

System configuration: protected in write by a 64-bit password in RF and a 64-bit password in I²C

GPO

Interruption pin configurable on multiple RF events (field change, memory write, activity, fast transfer, user set/reset/pulse), and I²C events (memory write completed, RF switch off)

Open drain or CMOS output (depending on version)

Low power mode (10-ball and 12-pin packages only)

Input pin to trigger low power mode

RF management

RF command interpreter enabled/disabled from I²C host controller

I²C priority: immediate RF switch off from I²C

Temperature range

Range 6:
From -40 °C to 85 °C

Range 8:
From -40 °C to 105 °C (UDFPN8 and UFDFPN12 only)
From -40 °C to 125 °C (SO8N and TSSOP8 only, 105 °C max on RF interface)

Package

8-pin, 10-ball, and 12-pin

ECOPACK2 (RoHS compliant)
Read more Read less

eDesignSuite

eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.

Choose design tool:

Power Management Design Center

Power Supply Design Tool

• SMPS design, by topology, by type and by product

• PFC design with analog and digitial control

• Supports various PCB configurations

Choose type:

DC/DC

AC/DC

Solar Battery Charger

Power Management Design Center

LED Lighting Design Tool

• Handles AC-DC and DC-DC design in common topologies

• Displays interactive and annotated schematic

• Provides current/voltage graphs, Bode plots, efficiency curves and power-loss data

Choose type:

DC/DC

AC/DC

Power Management Design Center

Digital Power Workbench

• Provides a step-by-step optimized design of power section and control loop

• Generates the STM32Cube embedded software package for custom applications and allows firmware project generation, compatible with multiple STM32 IDEs

Power Management Design Center

Power Tree Designer

• Specify input/output power for each node in the tree

• Check for consistency

• Design each individual node

Choose design tool: