TDA7719

NRND
Save to myST

Automotive 3 band car audio processor

Download datasheet
Order Direct
Overview

Product overview

Description

Description

The TDA7719 is a high performance signal processor specifically designed for car radio applications. The device includes a high performance audioprocessor with fully integrated audio filters and new Soft Step architecture. The digital control allows programming in a wide range of filter characteristics. By the use of BCMOS-process and liner signal processing low distortion and low noise are obtained.

  • All features

    • AEC-Q100 qualified
    • Input multiplexer
      • Multiple input configuration for different application
    • Loudness
      • 2ndorder frequency response
      • Programmable center frequency
      • 15 dB with 1 dB steps
      • Selectable high frequency boost
      • Selectable flat-mode
    • Volume
      • +15 dB to -15 dB with 1 dB step resolution
      • Soft-step control with programmable blend times
    • Bass
      • 2ndorder frequency response
      • Center frequency programmable in 4 steps
      • Q programmable 1.0/1.25/1.5/2.0
      • DC gain programmable
      • -15 dB to 15 dB range with 1 dB resolution
    • Middle
      • 2ndorder frequency response
      • Center frequency programmable in 4 steps
      • Q programmable 0.5/0.75/1.0/1.25
      • -15 dB to 15 dB range with 1 dB resolution
    • Treble
      • 2ndorder frequency response
      • Center frequency programmable in 4 steps
      • -15 dB to 15 dB with 1 dB resolution
    • Speaker
      • 4 independent soft-step speaker controls
      • 0 dB to -79 dB with 1 dB steps
      • Direct mute
    • Subwoofer
      • 2ndorder low pass filter with programmable cut off frequency
      • 2 independent soft-step level control
    • Mute functions
      • Direct mute
      • Digitally controlled SoftMute with 4 programmable mute-times
    • Offset detection
      • Offset voltage detection circuit for on-board power amplifier failure diagnosis
    • Level meter
      • Provide rectified level voltage of main source signal (before loudness)
    • Rear seat selector
      • Full source selector for rear seat output
    • Mixing selector

Circuit Diagram

Download
Products

Search History

Bookmark

Please log in  to show your saved searches.

▼

Did you know?

Please provide email

Please enter code

Congratulations!

Simple subscription

Congratulations!

x

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

Invalid code, please check the code sent to your email address and validate again. In case you did not receive any code please select 'I did not receive code'

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

Please review our Privacy Statement that describes how we process your profile information and how to assert your personal data protection rights

You are now subscribed to
- TDA7719

You can re-use the validation code to subscribe to another product or application.

Sorry, there was a problem on our servers. Please try again.
The current status of a product:
Active: Product is in volume production
Evaluation: Product is under characterization. Limited Engineering samples available
Preview: Product is in design stage
Target: Product is in design feasibility stage.No commitment taken to produce
Proposal: Marketing proposal for customer feedback.No commitment taken to design or produce
NRND: Not Recommended for New Design.Product is in volume production only to support customers ongoing production.Marketing description of the package type.Compliancy of the device with industry requirement domains (IRD)The RoHS status of a product:
ECOPACK 1: Initial grade to identify European RoHS compliant products.
ECOPACK 2: New grade to identify brominated chlorinated and antimony oxide flame retardant free products.
ECOPACK 3: Halogen free RoHS exemptions free products.
(*): ECOPACK 2 version available upon request.
(**): Some versions still existing in ECOPACK 1 or not compliant.The current status of a product:
Active: Product is in volume production
Evaluation: Product is under characterization. Limited Engineering samples available
Preview: Product is in design stage
Target: Product is in design feasibility stage.No commitment taken to produce
Proposal: Marketing proposal for customer feedback.No commitment taken to design or produce
NRND: Not Recommended for New Design.Product is in volume production only to support customers ongoing production.Budgetary PriceMarketing description of the package type.Storage method used to contain product.Main country of assembly or fabrication of the product.ECCNs are five character alpha-numeric designations used on the Commerce Control List to identify dual-use items for export control purposes. ECCNs are five character alpha-numeric designations used on the Commerce Control List to identify dual-use items for export control purposes.The value as specified by level (minTypMax) of the ambient temperature (in Cel) in which this item was designed to operate.The value as specified by level (minTypMax) of the ambient temperature (in Cel) in which this item was designed to operate.