EVLONEPCC

Active
Save to myST

USB Type-C adapter to connect ST-ONE and ST-ONEMP with STEVAL-PCC020V2

Download databrief
Order Direct
Overview

Product overview

Description

Description

The compact design of the EVLONEPCC allows to communicate between ST-ONE (or ST-ONEMP) and STEVAL-PCC020V2 using the UART communication channel on the USB Type-C port of the EVLONEx board. To configure ST-ONE (or ST-ONE MP) parameters through the CC line, ST-ONE (or ST-ONEMP) must be programmed as follows:

- APPL_SETUP: disabled

- USART_ebable (UART mapping): CC1/CC2

- Programming mode: enabled

The device’s parameters are programmed from the PC through a dedicated GUI. Connecting the USB Type-C port of the EVLONEx board to the Plug USB Type-C connector of EVLONEPCC, and connecting the other side of this adapter to a 6-way female Picoflex IDC flat Ribbon cable, it is possible to open the UART communication channel between ST-ONE (or ST-ONEMP) and STEVAL-PCC020V2.

ATTENTION: If there is no communication between the device and STEVAL-PCC020V2, please reverse the connection of the USB Type-C connector of the adapter.

  • All features

    • Full reference design for USB Type-C® to 6-way female Picoflex IDC flat Ribbon cable adapter with USB Type-C connector and 6-way Picoflex connector.
    • Dimensions: 37.1 x 13.4 x 9.6 mm (L x W x H).
    • Useful to set ST-ONE and ST-ONEMP parameters through UART channel when UART mapping is set on CC1/CC2.
    • It is possible to communicate between ST-ONE (or ST-ONEMP) and STEVAL-PCC020V2 directly using the USB Type-C port of the EVLONEx board.

You might also like...

ST-ONEMP

Fully integrated controller for multiport smart chargers

ST-ONE

Fully integrated controller for smart chargers

Products

Search History

Bookmark

Please log in  to show your saved searches.

▼

Did you know?

Please provide email

Please enter code

Congratulations!

Simple subscription

Congratulations!

x

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

Invalid code, please check the code sent to your email address and validate again. In case you did not receive any code please select 'I did not receive code'

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute.

Please review our Privacy Statement that describes how we process your profile information and how to assert your personal data protection rights

You are now subscribed to
- EVLONEPCC

You can re-use the validation code to subscribe to another product or application.

Sorry, there was a problem on our servers. Please try again.
The current status of a product:
Active: Product is in volume production
Evaluation: Product is under characterization. Limited Engineering samples available
Preview: Product is in design stage
Target: Product is in design feasibility stage.No commitment taken to produce
Proposal: Marketing proposal for customer feedback.No commitment taken to design or produce
NRND: Not Recommended for New Design.Product is in volume production only to support customers ongoing production.Marketing description of the package type.Compliancy of the device with industry requirement domains (IRD)The RoHS status of a product:
ECOPACK 1: Initial grade to identify European RoHS compliant products.
ECOPACK 2: New grade to identify brominated chlorinated and antimony oxide flame retardant free products.
ECOPACK 3: Halogen free RoHS exemptions free products.
(*): ECOPACK 2 version available upon request.
(**): Some versions still existing in ECOPACK 1 or not compliant.Compliancy with WEEE Directive (2012/19/EU)Longevity Commitment in yearsLongevity Starting DateThe current status of a product:
Active: Product is in volume production
Evaluation: Product is under characterization. Limited Engineering samples available
Preview: Product is in design stage
Target: Product is in design feasibility stage.No commitment taken to produce
Proposal: Marketing proposal for customer feedback.No commitment taken to design or produce
NRND: Not Recommended for New Design.Product is in volume production only to support customers ongoing production.Budgetary PriceMain country of assembly or fabrication of the product.ECCNs are five character alpha-numeric designations used on the Commerce Control List to identify dual-use items for export control purposes. ECCNs are five character alpha-numeric designations used on the Commerce Control List to identify dual-use items for export control purposes.