Evaluation boards from partners - Products

Absolute piezoresistive pressure sensor, manufactured using a proprietary technology

H-Bridge 9 Click is a compact add-on board that contains six MOSFET half-bridge outputs. This board features the L99UDL01, a six-channel half-bridge driver monolithic integrated circuit that is PWM configurable and current regulated

eFuse Click is a compact add-on board that contains a programmable electronic power breaker. This board features the STPW12.

LTE CAT1 embedded wireless communication development kit Matched with STM32 Nucleo-64

Evaluation/starter board with Ethernet interface

Evaluation board for Acconeer A121 sensor

Evaluation board for Acconeer XM125 module

LTE Cat.1 embedded wireless communication development kit Matched with STM32 Nucleo-64 and STM32 Nucleo-144

Evaluation board with SHT40 humidity and temperature sensor compatible with STM32 ODE ecosystem

Evaluation Board based on DHCOR STM32MP15

Advanced educational/EvaluationBoards

EVB board + SW coding service for early SW debug

Introductory tool for module testing and quick start of hardware development

Brushed DC motor driver with the current limiting and current sensing

Stepper motor driver with the PWM current control and selectable microstepping up to 256 microsteps

Stepper motor driver with PWM current control, selectable microstepping up to 256 microsteps & a wide voltage range

Evaluation platform to test Swift?s Starling Positioning Engine and Skylark Precise Positioning Service with a Teseo GNSS receiver.

Evaluation Board for the LPS22DF barometric pressure sensor and the Sensirion SHT4x Temperature and Humidity, SGP40 VOC sensors

Measures linear and angular velocity with six degrees of freedom

Three-axis gyroscope Click board™ that can sense motion over three perpendicular axes

Advanced 6-axis motion (gyro +accelero) tracking Click board™ in a SiP

NFC tag device, offering 16 Kbit of EEPROM

Compact add-on board that contains a ranging sensor with multi-target detection

Prototype faster and start proof of concepts of your LoRa + BLE based IoT solutions through iMCP HTLRBL32L

Compact add-on board that contains a DC motor driver for automotive applications

Compact add-on board that contains a standalone autonomous USB power delivery controller

Compact add-on board with highest density memory solution 4Mbit electrically erasable programmable memory IC

Compact add-on board suitable for controlling BLDC motors

Compact add-on board integrating motion sensors

netSHIELD industrial ethernet protocols expansion board for STM32 Nucleo

Real-time clock module with ultra low power consumption targeted for single button cell battery

Compact add-on board that contains a standalone autonomous USB power delivery controller

Compact add-on board that contains a monolithic bus driver with ISO 9141 interface

LiPo/Li-Ion battery charger with monitoring IC

BLE SOC application processor certified module

EK-ST50H is compliant with the Nucleo boards and STM32Cube Ecosystem form as the consistent set of HW and SW development resources

Inclinometer 2 Click is a compact board that features IIS2ICLX, high accuracy, and resolution two-axis inclinometer the orientation angle of an object

Unique modular system allowing displays with different configurations, easy adaptation and an upgrade of the display without changing the design

EVB - Evaluation Board for 1001312 (Wi-Fi/Bluetooth)

Measure temperature measurements between -40°C and +125°C

LightRanger 10 Click is a add-on board which features the VL53L4CX, a ToF optical distance sensor with an extended target detection range.

EVB - Evaluation Board for 1004795 (5G/LTE/LPWA)

Ultra-low power triaxial "femto" accelerometer sensor with embedded intelligence

Spectrometer 2 Click is a compact add-on board that collects light waves, features the VD6283TX, a color sensor with advanced light flicker extraction.

EVB - Evaluation Board for 1001011 (GNSS (GPS/Glonass/BeiDou/Galileo)

Step Down 3 Click is a compact add-on board features the ST1PS03, a nano-quiescent miniaturized synchronous step-down converter with a load switch.

Brushless 17 Click is a add-on board for controlling brushless DC (BLDC) motors with the L6229Q, three-phase motor driver with overcurrent protection

Light Ranger 4 click carries the VL53L1X, which is a FlightSense™ enabled rangefinder module from STMicroelectronics

SolidSwitch 2 Click as its foundation uses the L9026, an automotive multi-channel relay driver optimized for automotive relay and LED applications.

Proximity 16 Click as its foundation uses the VL53L5CX, an 8x8 multi-zone Time-of-Flight sensor with wide FoV for each zone.

Very accurate & low power 3D magnetic sensor to measure the intensity of the magnetic field across three perpendicular axes

NFC Tag 5 Click is a compact add-on board that features the M24LR64E-R, a dynamic NFC/RFID tag IC with a dual interface 64-Kbit EEPROM.

Complete solution for a 3-phase integrated motor driver

NFC 4 Click is a compact add-on board that features the M24LR64E-R, a dynamic NFC/RFID tag IC transceiver for contactless communication.

Accessory board in mikroBUS form factor. It features 24C08WP high. perf. serial 8K EEPROM in DIP packaging

Barometer 8 Click is used to measure air pressure in a specific environment with the ILPS22QS an ultra-compact piezoresistive absolute pressure sensor

Accel 19 Click is a compact peripheral add-on board that features the LIS2DTW12, an ultra-low-power high-performance three-axis accelerometer sensor.

Contactless transceiver with trace antenna

M24SR64 NFC/RFID tag IC with a dual interface and 8KB of high-reliability EEPROM built-in

Easy access to the pins on the board in order to simplify development and testing

Proximity sensor carrying ST's VL6180X IC based on ST's patented FlightSense technology

Display modules integrated with STM32 microcontroller

Piezoresistive absolute pressure sensor with a measurement range from 260 to 1260 hPa (with a 24-bit resolution output)

Evaluation Boards with iMCP HT32SX.

Ultra-Low Power WiFi & BLE expansion board for STM32 Nucleo

This Riverdi Nucleo 1.54" Display Kit comes with a fixed standard High Brightness IPS displays, which you can customize.

This Riverdi Nucleo 3.5? Display Kit comes with a fixed standard High Brightness IPS displays, which you can customize.

Low-power high-performance 3-axis linear accelerometer on a 33V power supply

Time-of-Flight ranging and gesture detector sensor with VL53L0X IC

Audio Amplifier

LS53L1BT motion and distance IoT Bluetooth board

Easy solution for adding a digital barometer to your design

Measures acceleration and magnetic field characteristics. 3D accelero + 3D magneto

Arduino shield for environmental sensing in MKR form factor

EEPROM chip with 256 KB of memory

EtherCAT slave controller/SoC for smart factory, industrial automation & IIoT

End-to-end hardware/software solution for analog voice activity detection

Highly efficient class D Audio Amplifier

ADC 21 Click is a compact add-on board that features the ADC1283, a low-power, eight-channel pure CMOS 12-bit analog-to-digital converter.

SoM IoT uGoal expansion board for STM32 Nucleo.

The EEPROM 9 Click is a evaluation board with the M95P32-I, 32Mbit electrically erasable, non-volatile programmable memory.

The LED Driver 19 Click is an add-on bord based in the LED1202, a 12-channel low quiescent current LED driver.

Smart DOF 2 Click is an add-on board that features LSM6DSV16XTR, a high-performance 6-axis IMU with sensor fusion, ASC, MLC, Qvar, and OIS/EIS paths.

IO-Link Master with SPI/UART/USB control interface

Smart DOF 3 Click is evaluation board which features ISM330IS, highly advanced integrated system-in-package (SIP) accelerometer and gyroscope sensors.

Buck 19 Click board features the STPD01, a programmable synchronous buck converter that steps down the voltage for USB power delivery aplications.

DC Motor 24 Click is a compact add-on board that features the L9958, an SPI-controlled H-bridge motor driver.

Accel 21 Click is an add-on board that features the MIS2DH, a high-performance three-axis accelerometer sensor.

The Accel 28 Click is a reference design board for LIS2HH12TR, an ultra-low-power high-performance three-axis accelerometer.

Versatile, high accuracy, multiple-chemistry battery gauge for applications single-cell batteries

Click board equipped with the L6986HTR, a synchronous step-down switching regulator

NFC tag interface device with possibility of using any shape and size external antenna, offering 16 Kbit EEPROM

Very accurate, magnetic field sensing Click board used to measure the intensity of the magnetic field across three perpendicular axes

Ultra-low power triaxial accelerometer sensor with embedded intelligence

Digitally controlled DC Voltage regulator in mikroBUS form factor

Proximity 15 Click is a compact add-on board that contains a close-range proximity sensing solution. This board features the VL53L1, a state-of-the-art, Time-of-Flight (ToF), a laser-ranging miniature sensor

Click board which utilizes the SPV1050, an ultralow power energy harvester and battery charger

Speech recognition click board, set up to recognize over 200 different voice commands + on-board STM32F4 carry them out instantly

Designers can easily evaluate AX58400 EtherCAT slave controller functionalities by using the AX58400 evaluation boards/demo kits

Barometer 10 Click board features the LPS28DFW an piezoresistive absolute pressure sensor, that measures air pressure in a specific environment.

QSMP-SV57 Eval-Kit for QSMP-1570

Contactless GigE module

Certified Contactless USB2 module

Evaluation board based on two STM32G070 with additional Software Library for functional safety solutions up to SIL 3 and PLe, Cat4

FMLR modules development and evaluation kits