STLINK-V3SET

Active

STLINK-V3 modular in-circuit debugger and programmer for STM32/STM8

Download databrief

Product overview

Description

STLINK-V3SET is a modular standalone debugging and programming probe for the STM8 and STM32 microcontrollers. It is composed of a main module and a complementary adapter board.

The SWIM and JTAG/SWD interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

STLINK-V3SET also provides a Virtual COM port interface allowing the host PC to communicate with the target microcontroller through one UART, and bridge interfaces (SPI, I2C, CAN, GPIOs) allowing, for instance, the programming of the target through the bootloader.

STLINK-V3SET can provide a second Virtual COM port interface allowing the host PC to communicate with the target microcontroller through another UART (called bridge UART). Bridge UART signals, including optional RTS and CTS, are available on the adapter board only (MB1440). The second Virtual COM port activation is done through a reversible firmware update, which also disables the mass storage interface (used for drag-and-drop flash programming).

The modular architecture of STLINK-V3SET enables it to extend its main features through additional modules such as the adapter board.

  • All features

    • Standalone probe with modular extensions
    • Self-powered through a USB connector (Micro-B)
    • USB 2.0 high-speed compatible interface
    • Direct firmware update support (DFU)
    • JTAG/Serial Wire Debug (SWD) specific features:
      • 3 to 3.6 V application voltage support and 5 V tolerant inputs
      • Flat cables STDC14 to MIPI10/STDC14/MIPI20 (connectors with 1.27 mm pitch)
      • JTAG communication support
      • SWD and Serial Wire Viewer (SWV) communication support
    • SWIM‑specific features (only available with adapter board MB1440):
      • 1.65 to 5.5 V application voltage support
      • SWIM header (2.54 mm pitch)
      • SWIM low-speed and high-speed modes support
    • Virtual COM port (VCP) specific features:
      • 3 to 3.6 V application voltage support on the UART interface and 5 V tolerant inputs
      • VCP frequency up to 15 MHz
      • Available on STDC14 debug connector (not available on MIPI10)
    • Multipath bridge USB to SPI/UART/I2C/CAN/GPIOs specific features:
      • 3 to 3.6 V application voltage support and 5 V tolerant inputs
      • Signals available on adapter board only (MB1440)
    • Drag-and-drop flash programming of binary files
    • Two-color LEDs: communication and power

You might also like...

The current status of a product:
Active: Product is in volume production
Evaluation: Product is under characterization. Limited Engineering samples available
Preview: Product is in design stage
Target: Product is in design feasibility stage.No commitment taken to produce
Proposal: Marketing proposal for customer feedback.No commitment taken to design or produce
NRND: Not Recommended for New Design.Product is in volume production only to support customers ongoing production.
The RoHS status of a product:
ECOPACK 1: Initial grade to identify European RoHS compliant products.
ECOPACK 2: New grade to identify brominated chlorinated and antimony oxide flame retardant free products.
ECOPACK 3: Halogen free RoHS exemptions free products.
(*): ECOPACK 2 version available upon request.
(**): Some versions still existing in ECOPACK 1 or not compliant.
The current status of a product:
Active: Product is in volume production
Evaluation: Product is under characterization. Limited Engineering samples available
Preview: Product is in design stage
Target: Product is in design feasibility stage.No commitment taken to produce
Proposal: Marketing proposal for customer feedback.No commitment taken to design or produce
NRND: Not Recommended for New Design.Product is in volume production only to support customers ongoing production.
Budgetary PriceECCNs are five character alpha-numeric designations used on the Commerce Control List to identify dual-use items for export control purposes. ECCNs are five character alpha-numeric designations used on the Commerce Control List to identify dual-use items for export control purposes.