Product overview
Description
This second series of SLLIMM (small low-loss intelligent molded module) provides a compact, high-performance AC motor drive in a simple, rugged design. It combines new ST proprietary control ICs (one LS and one HS driver) with an improved short-circuit rugged trench gate field-stop (TFS) IGBT, making it ideal for motor drives operating up to 20 kHz in hard-switching circuitries.
-
All features
- IPM 15 A, 600 V, 3-phase IGBT inverter bridge including 2 control ICs for gate driving and freewheeling diodes
- 3.3 V, 5 V TTL/CMOS inputs with hysteresis
- Internal bootstrap diode
- Undervoltage lockout of gate drivers
- Smart shutdown function
- Short-circuit protection
- Shutdown input/fault output
- Separate open emitter outputs
- Built-in temperature sensor
- Comparator for fault protection
- Short-circuit rugged TFS IGBT
- Very fast, soft recovery diodes
- 85 kΩ NTC, UL 1434, CA 4 recognized
- Fully isolated package
- Isolation rating of 1600 Vrms/min.
- UL recognition: UL 1557, file E81734
eDesignSuite
eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.
Power Management Design Center
Thermal-electrical Simulators for Components
Signal Conditioning Design Tool
NFC/RFID Calculators
Choose design tool: 
Power Management Design Center
Power Supply Design Tool
• SMPS design, by topology, by type and by product
• PFC design with analog and digitial control
• Supports various PCB configurations
Choose type: DC/DC AC/DC Solar Battery Charger
Power Management Design Center
LED Lighting Design Tool
• Handles AC-DC and DC-DC design in common topologies
• Displays interactive and annotated schematic
• Provides current/voltage graphs, Bode plots, efficiency curves and power-loss data
Choose type: DC/DC AC/DC
Power Management Design Center
Digital Power Workbench
• Provides a step-by-step optimized design of power section and control loop
• Generates the STM32Cube embedded software package for custom applications and allows firmware project generation, compatible with multiple STM32 IDEs
Power Management Design Center
Power Tree Designer
• Specify input/output power for each node in the tree
• Check for consistency
• Design each individual node
Choose design tool: 
Thermal-electrical Simulators for Components
AC Switches Simulator
• Select ratings and application waveforms
• Get junction temperature and blocking voltage graphs
• Search and sort suitable devices
Thermal-electrical Simulators for Components
Rectifier Diodes Simulator
• Select ratings and application waveforms
• Estimate power losses
• Search and sort suitable devices
Thermal-electrical Simulators for Components
Twister Sim
• Help select the right ViPOWER Automotive power device
• Supports load-compatibility, wiring harness optimization, fault condition impact and diagnostic analysis
• Supports various PCB configurations
Thermal-electrical Simulators for Components
TVS Simulator
• Specify system ratings and surge waveform
• Search and sort suitable devices
Thermal-electrical Simulators for Components
Estimate
• Build simple schematics and firmware inputs in minutes
• Quickly generate reliable estimates of battery life, system power consumption and bill of materials costs
Thermal-electrical Simulators for Components
PCB Thermal Simulator
• Thermal analysis of a PCB from Gerber files.
• Possibility to add heat sources, heat sinks, copper areas and thermal paths.
• Powerful server-side engine for rendering and simulation.
• Thermal results shown graphically via 2D table.
Choose design tool: 
Signal Conditioning Design Tool
Active Filters
• Handles multi-stage-designs and common topologies
• Returns circuit component values
• Provides gain, phase and group delay graphs
• Low Pass, High Pass and Band Pass
Signal Conditioning Design Tool
Comparators
• Handles most common configurations
• Returns circuit components values
• Provides I/O signal waveforms
• Inverting, Non Inverting, Window
Signal Conditioning Design Tool
Low side Current Sensing
• Returns circuit component values
• Provides current error graphs
Signal Conditioning Design Tool
High side Current Sensing
• Provides current error graphs.
• Help to select the right High side current sensing and shunt devices.
Choose design tool: 
NFC/RFID Calculators
NFC Inductance
• Input geometry and substrate properties
• Get antenna impedance
NFC/RFID Calculators
UHF Link Budget
• Enter forward and reverse link characteristics
• The tool returns link budget estimate
NFC/RFID Calculators
NFC Tuning Circuit
• Enter antenna parameter and matching target
• Select the topology of the matching network
• The tool returns component values for the desired design targets
Thermal-electrical Simulators for Components
STPOWER Studio
• Supports long mission profiles
• Provides power loss and temperature graphs
• Helps define heatsink thermal properties
You might also like...
Recommended for you
All tools & software
All resources
| Resource title | Version | Latest update |
|---|
Product Specifications (1)
| Resource title | Version | Latest update | ||
|---|---|---|---|---|
| 9.0 | 28 May 2021 | 28 May 2021 |
Application Notes (4)
| Resource title | Version | Latest update | ||
|---|---|---|---|---|
| 1.0 | 31 Oct 2024 | 31 Oct 2024 | ||
| 4.0 | 31 Oct 2024 | 31 Oct 2024 | ||
| 1.0 | 22 Nov 2018 | 22 Nov 2018 | ||
| 2.1 | 18 Dec 2024 | 18 Dec 2024 |
Technical Notes & Articles (2)
| Resource title | Version | Latest update | ||
|---|---|---|---|---|
| 1.0 | 31 Oct 2024 | 31 Oct 2024 | ||
| 1.0 | 31 Oct 2024 | 31 Oct 2024 |
Presentations (2)
| Resource title | Version | Latest update | ||
|---|---|---|---|---|
| 1.0 | 13 Jul 2018 | 13 Jul 2018 | ||
| 1.1 | 18 Oct 2023 | 18 Oct 2023 |
Flyers (5)
| Resource title | Version | Latest update | ||
|---|---|---|---|---|
| 1.0 | 23 Feb 2021 | 23 Feb 2021 | ||
| 1.0 | 06 May 2020 | 06 May 2020 | ||
| 1.0 | 04 May 2020 | 04 May 2020 | ||
| 1.0 | 11 Nov 2022 | 11 Nov 2022 | ||
| 1.0 | 15 Oct 2020 | 15 Oct 2020 |
EDA Symbols, Footprints and 3D Models
STMicroelectronics - STGIF10CH60TS-L
Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.
Please select one model supplier :
Symbols
Footprints
3D models
Quality and Reliability
| Part Number | Marketing Status | Package | Grade | RoHS Compliance Grade | Material Declaration** |
|---|---|---|---|---|---|
| STGIF10CH60TS-L | Active | SDIP2F-26L | Industrial | Ecopack2 | |
STGIF10CH60TS-L
Package:
SDIP2F-26LMaterial Declaration**:
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
Sample & Buy
Don't show this again
| Part Number | Marketing Status | Budgetary Price (US$)*/Qty | Order from ST | Order from distributors | Package | Packing Type | RoHS | Country of Origin | ECCN (US) | ECCN (EU) | Operating Temperature (°C) (min) | Operating Temperature (°C) (max) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| STGIF10CH60TS-L | | | distributors No availability of distributors reported, please contact our sales office |
STGIF10CH60TS-L Active
Budgetary Price (US$)*/Qty:
-
distributors
No availability of distributors reported, please contact our sales office
Package:
Packing Type:
Country of Origin:
ECCN (US):
ECCN (EU):
Don't show this again
(*) Suggested Resale Price (USD) per defined quantity for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors