ALED7709

量産中
Design Win Education Education
MySTに保存する

Automotive LED driver 4-channel 200 mA with a DC-DC controller

Download datasheet
Order Direct

製品概要

概要

ALED7709x are automotive-grade (AEC-Q100 Grade1 qualified) LED drivers combining a boost/SEPIC controller and four low-side constant-current sinkers, designed to drive strings of high brightness LEDs. The switching converter section provides the supply rail for the LED strings, whose value is constantly optimized for maximum efficiency. The boost/SEPIC controller supports the external synchronization and spread spectrum. ALED7709x can work simultaneously or exclusively in standalone mode (SAM), controlled only by PWMI signal, and in bus driven mode (BDM) through an I2C serial interface. The brightness of the four LED strings can be controlled either in global or local mode. In global mode, the ALED7709x supports a mixed PWM and analog dimming to improve the brightness range capability. Only the BDM provides full access to ALED7709x advanced features. PWM dimming frequency can be programmed changing the setting of the internal 16-bit counter, while an internal oscillator avoids the use of an external clock source.

The ALED7709A is dedicated to BDM while ALED7709B is more suitable for SAM. ALED7709x implement basic protections (overvoltage, overcurrent, and thermal shutdown) as well as “Open and Short” LED fault detection, with optional channel auto-disconnect in case of fault.

The devices support an optional P-channel MOSFET in series to the input. It protects the system, LED strings and channels in case of some faulty conditions, output short-to-ground or excessive input voltage transients and it also reduces the power consumption when in standby.

  • 特徴

    • AEC-Q100 Grade1 qualified
      • Operating temperature range -40 °C < TJ < 150 °C
    • 4.5 V to 42 V operating input voltage range
      • Up to 60 V tolerant for load dump @ 24 V battery
      • Supports battery cranking events down to 4 V supply
    • Simultaneous or exclusive control by PWMI and I2C interface
    • Switching controller section
      • Low shutdown current: ISHDN < 15 µA
      • Fixed frequency peak current-mode controller
      • Cycle-by-cycle power switch OCP
      • Adjustable (250 kHz to 2.2 MHz) switching frequency with optional spread spectrum
      • Synchronized boost and SEPIC topologies support
      • Line switch control for standby power saving and inrush current protection
      • Input overvoltage and output short-circuit protection
    • LED strings control section
      • 4 x 40 V rated constant current outputs
      • Adjustable up to 200 mA per channel
      • ±2% typ. output current accuracy
      • Mixed PWM and Analog dimming
      • 100 Hz to 12.8 kHz dimming frequency
      • Dimming ratio 10000:1 at 100 Hz
      • LED temperature sensor (NTC) management
      • Selectable channels phase-shifting and adjustable Rise/Fall time for reducing EMI
      • Open channel, LED short-circuit detection
      • Two versions available: ALED7709A and ALED7709B
    続きを読む 一部を表示

eDesignSuite

eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.

Power Management Design Center

Thermal-electrical Simulators for Components

Signal Conditioning Design Tool

NFC/RFID Calculators

Choose design tool:
Power Management Design Center

Power Supply Design Tool

• SMPS design, by topology, by type and by product
• PFC design with analog and digitial control
• Supports various PCB configurations
Choose type:
DC/DC
AC/DC
太陽光発電システム
Power Management Design Center

LED Lighting Design Tool

• Handles AC-DC and DC-DC design in common topologies
• Displays interactive and annotated schematic
• Provides current/voltage graphs, Bode plots, efficiency curves and power-loss data
Choose type:
DC/DC
AC/DC
Power Management Design Center

Digital Power Workbench

• Provides a step-by-step optimized design of power section and control loop
• Generates the STM32Cube embedded software package for custom applications and allows firmware project generation, compatible with multiple STM32 IDEs
Power Management Design Center

Power Tree Designer

• Specify input/output power for each node in the tree
• Check for consistency
• Design each individual node
Choose design tool:
Thermal-electrical Simulators for Components

AC Switches Simulator

• Select ratings and application waveforms
• Get junction temperature and blocking voltage graphs
• Search and sort suitable devices
Thermal-electrical Simulators for Components

Rectifier Diodes Simulator

• Select ratings and application waveforms
• Estimate power losses
• Search and sort suitable devices
Thermal-electrical Simulators for Components

STPOWER Studio

• Supports long mission profiles
• Provides power loss and temperature graphs
• Helps define heatsink thermal properties
Thermal-electrical Simulators for Components

Twister Sim

• Help select the right ViPOWER Automotive power device
• Supports load-compatibility, wiring harness optimization, fault condition impact and diagnostic analysis
• Supports various PCB configurations
Thermal-electrical Simulators for Components

TVS Simulator

• Specify system ratings and surge waveform
• Search and sort suitable devices
Thermal-electrical Simulators for Components

Estimate

• Build simple schematics and firmware inputs in minutes
• Quickly generate reliable estimates of battery life, system power consumption and bill of materials costs
Choose design tool:
Signal Conditioning Design Tool

Active Filters

• Handles multi-stage-designs and common topologies
• Returns circuit component values
• Provides gain, phase and group delay graphs
• Low Pass, High Pass and Band Pass
Signal Conditioning Design Tool

Comparators

• Handles most common configurations
• Returns circuit components values
• Provides I/O signal waveforms
• Inverting, Non Inverting, Window
Signal Conditioning Design Tool

Low side Current Sensing

• Returns circuit component values
• Provides current error graphs
Signal Conditioning Design Tool

High side Current Sensing

• Provides current error graphs.
• Help to select the right High side current sensing and shunt devices.
Choose design tool:
NFC/RFID Calculators

NFC Inductance

• Input geometry and substrate properties
• Get antenna impedance
NFC/RFID Calculators

UHF Link Budget

• Enter forward and reverse link characteristics
• The tool returns link budget estimate
NFC/RFID Calculators

NFC Tuning Circuit

• Enter antenna parameter and matching target
• Select the topology of the matching network
• The tool returns component values for the desired design targets

おすすめ製品

STSW-eDSim

eDSim: fast and powerful electrical simulation software for SMPS and analog ICs

STEVAL-LLL014V1

Automotive LED driver 4-channel evaluation kit based on ALED7709

EDAシンボル / フットプリント / 3Dモデル

STMicroelectronics - ALED7709

Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.

Please select one model supplier :

Start your design with UltraLibrarian
Start your design with SamacSys
Symbols

EDAシンボル

Footprints

フットプリント

3D model

3Dモデル

すべてのリソース

すべてのカテゴリを表示
タイトル
バージョン
更新日

SIMPLIS models (1)

タイトル
バージョン
更新日
ALED7709 SIMPLIS example schematics
2024.06 14 Jun 2024
14 Jun 2024
ALED7709 SIMPLIS example schematics 2024.06

品質 & 信頼性

製品型番 マーケティング･ステータス パッケージ グレード RoHSコンプライアンスグレード 材料宣誓書**
ALED7709ATR
量産中
QFPN 5X5X0.90 24L PITCH 0.65 A.G オートモーティブ Ecopack3
ALED7709BTR
量産中
QFPN 5X5X0.90 24L PITCH 0.65 A.G オートモーティブ Ecopack3

ALED7709ATR

Package:

QFPN 5X5X0.90 24L PITCH 0.65 A.G

Material Declaration**:

PDF XML
More Info

Marketing Status

量産中

Package

QFPN 5X5X0.90 24L PITCH 0.65 A.G

Grade

Automotive

RoHS Compliance Grade

Ecopack3

ALED7709BTR

Package:

QFPN 5X5X0.90 24L PITCH 0.65 A.G

Material Declaration**:

PDF XML
More Info

Marketing Status

量産中

Package

QFPN 5X5X0.90 24L PITCH 0.65 A.G

Grade

Automotive

RoHS Compliance Grade

Ecopack3

(**) st.comで提供している材料宣誓書は、パッケージ･ファミリ内で最も一般的に使用されているパッケージに基づく汎用ドキュメントの場合があります。そのため、特定の製品では100%正確ではない可能性があります。特定の製品情報については、セールスサポートまでお問い合わせください

サンプル & 購入

（*）概算用の参考価格（US$）です。現地通貨でのお見積りについては、STのセールス･オフィスまたは販売代理店までお問い合わせください。

製品

検索履歴

ブックマーク

Please log in  to show your saved searches.

▼
戻る
戻る
戻る

ご存知でしたか？

Please provide email

Please enter code

Congratulations!

Simple subscription

Congratulations!

x

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

Invalid code, please check the code sent to your email address and validate again. In case you did not receive any code please select 'I did not receive code'

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

お客様のプロフィール情報をSTが処理する方法、及びお客様の個人データ保護の権利を行使する方法について説明した、STのプライバシー･ステートメントをご確認ください。

以下の製品のお知らせを受け取れます
- ALED7709

You can re-use the validation code to subscribe to another product or application.

Sorry, there was a problem on our servers. Please try again.