製品概要
概要
The ST21NFCL is a contactless front-end (CLF) based on Arm® core and designed for integration in mobile devices and NFC-compliant products.
The ST21NFCL performs near-field communication (NFC) functions in the three operating modes: card emulation, reader/writer and peer-to-peer communication. It is based on an advanced Arm® Cortex®-M3 32-bit microcontroller. The ST21NFCL is designed to increase RF communication distances, ease NFC technology integration, and operate in efficient low power modes.
The ST21NFCL is best in class in terms of RF output power, working up to 2 W. Maximum power can be safely used to communicate thanks to a dynamic control: when a card is close, power is automatically reduced to ensure interoperability and standard compliance. To go with this outstanding output power, demodulation sensitivity is improved to maximize the communication distance with all types of cards.
The ST21NFCL card emulation mode does not require any external oscillator nor reference clock source. Thanks to active load modulation and automatic adjustments based on field strength, communication distance is maximized, and interoperability is ensured.
The ST21NFCL can operate in a very low power modes while detecting, thanks to an improved field detection sensitivity and a stable and efficient low power card detection mechanism, the presence of a reader, a card, or a tag beyond its rated communication distance.
The ST21NFCL exchanges data with the device application processor over the NCI 2.1 logical interface on top of the I2C connection. It features three external SWP master interfaces.
The ST21NFCL is manufactured in ECOPACK-compliant packages:
3.475 × 3.667 x 0.511 mm, 90-ball wafer-level chip-scale package (WLCSP), 0.35 mm pitch
2.559 x 2.581 x 0.455 mm, 49-ball wafer-level chip-scale package (WLCSP), 0.35 mm pitch.
To meet environmental requirements, ST offers the ST21NFCL devices in ECOPACK packages. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.
-
特徴
-
- NFC controller available in WLCSP49 and WLCSP90, ECOPACK-compliant packages
- NFC controller
- Arm® Cortex®-M3 microcontroller
- 100% re-flashing capability for firmware update
- Enhanced active load modulation technology
- Enhanced Tx drive up to 2W
- Support of external DC/DC up to 5.5 V
- Highest output power with optimized power transfer
- Optimized for extremely small or metal frame antennas
- Optimized low-power consumption modes
- Selectable ultralow power hibernate state
- Battery voltage monitoring
- Proprietary in-frame synchronization (IFS) in card emulation (CE) to ensure stability in battery low and switched off modes
- Improved XOR mode on all technologies
- OOFS with external reference clock in CE
- System clock
- Fractional-N PLL input range of 19.2 to 76.8 MHz
- Support of multiple external crystal oscillator (27.12 MHz and 54.24 MHz)
- 32.768 kHz, 16MHz and 32MHz support for EMC tests
- Automatic wakeup via communication interfaces, GPIO, RF field or tag detection and power supply detection
- RF communications
- Active and passive peer-to-peer
- ISO/IEC 18092 - NFCIP-1 initiator and target
- Reader/writer mode
- NFC ForumTM Type 1/2/3/4/5 tags
- FeliCaTM
- ISO/IEC 15693
- MIFARE®1
- Card emulation mode
- ISO/IEC 14443 Type A & B
- FeliCaTM
- Intelligent card switching
- MIFARE®
- Active and passive peer-to-peer
- Communication interfaces
- Up to three I3C interfaces depending on the package
- Up to two SPI interfaces depending on the package
- I2C interface supporting standard, fast, and fast+ modes
- GPIOs
- Electrical characteristics
- Battery voltage support from 2.4 V to 5.1 V
- I/O dedicated voltage level (VPS_IO): 1.2 V and 1.8 V compatibility
- Supports Class B and C operating conditions for UICC – Class D ready
- Ambient operating temperature -30 to + 85 °C
-
EDAシンボル / フットプリント / 3Dモデル
STMicroelectronics - ST21NFCL
Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.
Please select one model supplier :
EDAシンボル
フットプリント
3Dモデル
品質 & 信頼性
| 製品型番 | マーケティング･ステータス | パッケージ | グレード | RoHSコンプライアンスグレード | 材料宣誓書** |
|---|---|---|---|---|---|
| ST21NFCL-WL9 | 量産中 | WLCSP | インダストリアル | N/A | |
| ST21NFCL-WLF | 量産中 | WLCSP | インダストリアル | N/A | |
ST21NFCL-WL9
Package:
WLCSPMaterial Declaration**:
ST21NFCL-WLF
Package:
WLCSPMaterial Declaration**:
(**) st.comで提供している材料宣誓書は、パッケージ･ファミリ内で最も一般的に使用されているパッケージに基づく汎用ドキュメントの場合があります。そのため、特定の製品では100%正確ではない可能性があります。特定の製品情報については、セールスサポートまでお問い合わせください
サンプル & 購入
| 製品型番 | 製品ステータス | Budgetary Price (US$)*/Qty | STから購入 | Order from distributors | パッケージ | 梱包タイプ | RoHS | Country of Origin | ECCN (US) | ECCN (EU) | Operating Temperature (°C) (min) | Operating Temperature (°C) (max) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ST21NFCL-WL9 | | | distributors 販売代理店に在庫がない場合は、STのセールス･オフィスまでお問い合わせください | ||||||||||
| ST21NFCL-WLF | | | distributors 販売代理店に在庫がない場合は、STのセールス･オフィスまでお問い合わせください |
ST21NFCL-WL9 量産中
販売代理店に在庫がない場合は、STのセールス･オフィスまでお問い合わせください
ST21NFCL-WLF 量産中
販売代理店に在庫がない場合は、STのセールス･オフィスまでお問い合わせください
（*）概算用の参考価格（US$）です。現地通貨でのお見積りについては、STのセールス･オフィスまたは販売代理店までお問い合わせください。