L5963

量産中
Design Win
MySTに保存する

Automotive dual monolithic switching regulator with LDO and HSD

Download datasheet
Order Direct

製品概要

概要

L5963 is a dual step-down switching regulator with internal power switches, high side driver and a low drop-out linear regulator that can operate as standby regulator or normal LDO.

All the regulators can be connected directly to the vehicle battery. In addition to an adjustable voltage detector, voltage supervisors are available.

The two DC-DC converters can work in free-run condition or synchronize themselves to an external clock. DC/DCs' PWM outputs have a 180° phase shift.

The high operating frequency allowed by the synchronization input helps to reduce AM and FM interferences and grants the use of small and low cost inductors and capacitors.

This IC finds application in the automotive segment, where load dump protection and wide input voltage range are mandatory.

A slug-up package option is available for applications which require heatsink use.

In standby condition the device guarantees extremely low quiescent current (25 μA typical @ -40 °C < T < 85 °C)

  • 特徴

    • AEC-Q100 qualified
    • Two step-down synchronous switching voltage regulators with internal power switches:
      • Wide input voltage range (from 3.5 V to 26 V)
      • Internal high-side/ low-side NDMOS
      • 1 V minimum output
      • 3.0 A load current
      • 250 kHz free-run frequency
      • 250 kHz < f < 2 MHz synchronization range
      • Integrated soft-start
      • Independent hardware enable pins
      • Independent power supply
      • 180° PWM output phase shift
      • Programmable switching frequency divider by 1, 2, 4 or 8 between the two DC/DC regulators
      • Power good function
    • One standby / linear regulator
      • Output voltage programmable with external resistor divider
      • 250 mA maximum current capability
      • Backup function
      • Power good function
    • One high side driver
      • 0.5 V max drop @ 0.5 A
      • Protected against short to ground and battery, loss of ground and battery, unsupplied short to battery
    • Programmable under voltage battery detector
      • Under voltage threshold adjustable through dedicated pin (VDIN)
    • Load dump protection
    • Independent thermal protection on all regulators
    • Independent current limit on all regulators
    • Extremely low quiescent current in standby conditions
    • Power good / adjustable voltage detector outputs to realize customized power up/down sequences
    続きを読む 一部を表示

eDesignSuite

eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.

Power Management Design Center

Thermal-electrical Simulators for Components

Signal Conditioning Design Tool

NFC/RFID Calculators

Choose design tool:
Power Management Design Center

Power Supply Design Tool

• SMPS design, by topology, by type and by product
• PFC design with analog and digitial control
• Supports various PCB configurations
Choose type:
DC/DC
AC/DC
太陽光発電システム
Power Management Design Center

LED Lighting Design Tool

• Handles AC-DC and DC-DC design in common topologies
• Displays interactive and annotated schematic
• Provides current/voltage graphs, Bode plots, efficiency curves and power-loss data
Choose type:
DC/DC
AC/DC
Power Management Design Center

Digital Power Workbench

• Provides a step-by-step optimized design of power section and control loop
• Generates the STM32Cube embedded software package for custom applications and allows firmware project generation, compatible with multiple STM32 IDEs
Power Management Design Center

Power Tree Designer

• Specify input/output power for each node in the tree
• Check for consistency
• Design each individual node
Choose design tool:
Thermal-electrical Simulators for Components

AC Switches Simulator

• Select ratings and application waveforms
• Get junction temperature and blocking voltage graphs
• Search and sort suitable devices
Thermal-electrical Simulators for Components

Rectifier Diodes Simulator

• Select ratings and application waveforms
• Estimate power losses
• Search and sort suitable devices
Thermal-electrical Simulators for Components

STPOWER Studio

• Supports long mission profiles
• Provides power loss and temperature graphs
• Helps define heatsink thermal properties
Thermal-electrical Simulators for Components

Twister Sim

• Help select the right ViPOWER Automotive power device
• Supports load-compatibility, wiring harness optimization, fault condition impact and diagnostic analysis
• Supports various PCB configurations
Thermal-electrical Simulators for Components

TVS Simulator

• Specify system ratings and surge waveform
• Search and sort suitable devices
Thermal-electrical Simulators for Components

Estimate

• Build simple schematics and firmware inputs in minutes
• Quickly generate reliable estimates of battery life, system power consumption and bill of materials costs
Choose design tool:
Signal Conditioning Design Tool

Active Filters

• Handles multi-stage-designs and common topologies
• Returns circuit component values
• Provides gain, phase and group delay graphs
• Low Pass, High Pass and Band Pass
Signal Conditioning Design Tool

Comparators

• Handles most common configurations
• Returns circuit components values
• Provides I/O signal waveforms
• Inverting, Non Inverting, Window
Signal Conditioning Design Tool

Low side Current Sensing

• Returns circuit component values
• Provides current error graphs
Signal Conditioning Design Tool

High side Current Sensing

• Provides current error graphs.
• Help to select the right High side current sensing and shunt devices.
Choose design tool:
NFC/RFID Calculators

NFC Inductance

• Input geometry and substrate properties
• Get antenna impedance
NFC/RFID Calculators

UHF Link Budget

• Enter forward and reverse link characteristics
• The tool returns link budget estimate
NFC/RFID Calculators

NFC Tuning Circuit

• Enter antenna parameter and matching target
• Select the topology of the matching network
• The tool returns component values for the desired design targets

推奨製品

おすすめ製品

AEK-COM-10BASET

10BASE-T1S MAC-PHY evaluation board

AEK-MCU-C4MINI1

All-in-one, fast-prototyping, user-friendly MCU and motor control evaluation board based on the Chorus SPC58EC80E5 automotive microcontroller

EVAL-L5963

L5963 Evaluation board

推奨コンテンツ

EDAシンボル / フットプリント / 3Dモデル

STMicroelectronics - L5963

Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.

Please select one model supplier :

Start your design with UltraLibrarian
Start your design with SamacSys
Symbols

EDAシンボル

Footprints

フットプリント

3D model

3Dモデル

品質 & 信頼性

製品型番 マーケティング･ステータス パッケージ グレード RoHSコンプライアンスグレード 材料宣誓書**
L5963DN-EHT
量産中
PowerSSO 36 オートモーティブ Ecopack2
L5963DN-EHX
量産中
PowerSSO 36 オートモーティブ Ecopack2
L5963Q-V0T
量産中
VFQFPN 48 7x7x1.0 mm オートモーティブ Ecopack2
L5963Q-V0Y
量産中
VFQFPN 48 7x7x1.0 mm オートモーティブ Ecopack2
L5963U-KBT
量産中
PowerSSO 36 オートモーティブ Ecopack2
L5963U-KBX
量産中
PowerSSO 36 オートモーティブ Ecopack2

L5963DN-EHT

Package:

PowerSSO 36

Material Declaration**:

PDF XML
More Info

Marketing Status

量産中

Package

PowerSSO 36

Grade

Automotive

RoHS Compliance Grade

Ecopack2

L5963DN-EHX

Package:

PowerSSO 36

Material Declaration**:

PDF XML
More Info

Marketing Status

量産中

Package

PowerSSO 36

Grade

Automotive

RoHS Compliance Grade

Ecopack2

L5963Q-V0T

Package:

VFQFPN 48 7x7x1.0 mm

Material Declaration**:

PDF XML
More Info

Marketing Status

量産中

Package

VFQFPN 48 7x7x1.0 mm

Grade

Automotive

RoHS Compliance Grade

Ecopack2

L5963Q-V0Y

Package:

VFQFPN 48 7x7x1.0 mm

Material Declaration**:

PDF XML
More Info

Marketing Status

量産中

Package

VFQFPN 48 7x7x1.0 mm

Grade

Automotive

RoHS Compliance Grade

Ecopack2

L5963U-KBT

Package:

PowerSSO 36

Material Declaration**:

PDF XML
More Info

Marketing Status

量産中

Package

PowerSSO 36

Grade

Automotive

RoHS Compliance Grade

Ecopack2

L5963U-KBX

Package:

PowerSSO 36

Material Declaration**:

PDF XML
More Info

Marketing Status

量産中

Package

PowerSSO 36

Grade

Automotive

RoHS Compliance Grade

Ecopack2

(**) st.comで提供している材料宣誓書は、パッケージ･ファミリ内で最も一般的に使用されているパッケージに基づく汎用ドキュメントの場合があります。そのため、特定の製品では100%正確ではない可能性があります。特定の製品情報については、セールスサポートまでお問い合わせください

サンプル & 購入

（*）概算用の参考価格（US$）です。現地通貨でのお見積りについては、STのセールス･オフィスまたは販売代理店までお問い合わせください。

製品

検索履歴

ブックマーク

Please log in  to show your saved searches.

▼
戻る
戻る
戻る

ご存知でしたか？

Please provide email

Please enter code

Congratulations!

Simple subscription

Congratulations!

x

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

Invalid code, please check the code sent to your email address and validate again. In case you did not receive any code please select 'I did not receive code'

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

お客様のプロフィール情報をSTが処理する方法、及びお客様の個人データ保護の権利を行使する方法について説明した、STのプライバシー･ステートメントをご確認ください。

以下の製品のお知らせを受け取れます
- L5963

You can re-use the validation code to subscribe to another product or application.

Sorry, there was a problem on our servers. Please try again.