製品概要
概要
L9965P is an automotive-grade single channel pyro-fuse driver capable to break high voltage battery line quickly and reliably in case of short circuit or car crash.
To accomplish this function, the device features a dual FET output stage made of a HS and a LS powerMOS. The stage is equipped with a closed loop current feedback and can be configured to deliver controlled firing profiles programming both current value and time duration.
Moreover, the power stage is able to perform a defined number of auto-retry attempts based on the success or not of the deployment.
The device embeds a programmable firing logic allowing to generate the trigger signal from two SPI commands or from two digital inputs (FENH/FENL).
The digital input triggers are compatible with both level and PWM encoding, supporting 16 kHz and 125 kHz encoded signals.
The device supports the charging of an external capacitor to be used as tank capacitor or as energy reserve (ER) in case of battery loss. An internal boost regulator can be used to control the ER cap voltage around a programmable setpoint. Boosting the input battery voltage allows using smaller ER capacitor values to store the energy needed for firing, even in case of ECU battery loss.
The device has been designed to deliver maximum safety and performance while still being energy efficient. A low-power operation strategy allows minimizing the idle consumption, keeping the device in an ultra low power state while still performing all the diagnostic sweeps needed for achieving the ASIL targets. The periodicity of the diagnostic sweeps can be programmed in order to comply with any FTTI. During such ultra low power state, the device is still sensitive to wake-up/trigger sources in order to be ready to fire.
Operation in conjunction with L9965C companion chip allows simplifying the software development, as many safety mechanisms are already implemented by L9965C.
-
特徴
- AEC-Q100 grade 1 qualified
- Full ISO26262 compliant, ASIL-D systems ready
- Very low power consumption:
- Less than 10 μA in deep-sleep mode (only trigger detection enabled)
- Less than 4 mA in low-power mode (trigger detection enabled, ER boost recharge active, cyclic diagnostics every 100 ms)
- Boost regulator to charge Energy Reserve (ER) with bang-bang control to reduce consumption
- FENH/FENL digital input triggers, compatible to level or PWM signals (16 kHz and 125 kHz), with line integrity check feature
- Autonomous cyclic diagnostic routine to ensure detection of all failures which may prevent safe deployment and/or cause inadvertent deployment
- Programmable deployment profile: current value and time duration can be adapted to different pyro-fuse igniters
- Firing strategy supporting multiple retry attempts based on user-selectable FIRE_GOOD signal
- Embedded NVM for configuration parameters storage and runtime configuration integrity check
- Easy integration with L9965C companion CSA, implementing many of the safety mechanisms needed to achieve ASIL targets, thus allowing easy L9965P plug and play in the system
- Pyro-fuse deployment available down to a minimum operating battery voltage of 6 V
- 24-bit peripheral SPI for direct MCU/L9965C interface
- Compatible with pyro-fuses certified according LV-16 and USCAR-28
EDAシンボル / フットプリント / 3Dモデル
STMicroelectronics - L9965P
Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.
Please select one model supplier :
EDAシンボル
フットプリント
3Dモデル
品質 & 信頼性
| 製品型番 | マーケティング･ステータス | パッケージ | グレード | RoHSコンプライアンスグレード | 材料宣誓書** |
|---|---|---|---|---|---|
| L9965P-FN | 開発中 | VFQFN 5X5X0.9 32+4L WETT. FLANKS | Automotive Safety | Ecopack2 | |
| L9965P-FN-TR | 量産中 | VFQFN 5X5X0.9 32+4L WETT. FLANKS | Automotive Safety | Ecopack2 | |
| L9965P-FP | 開発中 | TQFP 32 7x7x1.0 | Automotive Safety | Ecopack2 | |
| L9965P-FP-TR | 評価中 | TQFP 32 7x7x1.0 | Automotive Safety | Ecopack2 | |
(**) st.comで提供している材料宣誓書は、パッケージ･ファミリ内で最も一般的に使用されているパッケージに基づく汎用ドキュメントの場合があります。そのため、特定の製品では100%正確ではない可能性があります。特定の製品情報については、セールスサポートまでお問い合わせください
サンプル & 購入
| 製品型番 | 製品ステータス | Budgetary Price (US$)*/Qty | STから購入 | Order from distributors | パッケージ | 梱包タイプ | RoHS | Country of Origin | ECCN (US) | ECCN (EU) | Operating Temperature (°C) (min) | Operating Temperature (°C) (max) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| L9965P-FN | | | distributors 販売代理店に在庫がない場合は、STのセールス･オフィスまでお問い合わせください | ||||||||||
| L9965P-FN-TR | | | distributors 販売代理店に在庫がない場合は、STのセールス･オフィスまでお問い合わせください | ||||||||||
| L9965P-FP | | | distributors 販売代理店に在庫がない場合は、STのセールス･オフィスまでお問い合わせください | ||||||||||
| L9965P-FP-TR | | | distributors 販売代理店に在庫がない場合は、STのセールス･オフィスまでお問い合わせください |
L9965P-FN 開発中
販売代理店に在庫がない場合は、STのセールス･オフィスまでお問い合わせください
L9965P-FN-TR 量産中
販売代理店に在庫がない場合は、STのセールス･オフィスまでお問い合わせください
L9965P-FP 開発中
販売代理店に在庫がない場合は、STのセールス･オフィスまでお問い合わせください
L9965P-FP-TR 評価中
販売代理店に在庫がない場合は、STのセールス･オフィスまでお問い合わせください
（*）概算用の参考価格（US$）です。現地通貨でのお見積りについては、STのセールス･オフィスまたは販売代理店までお問い合わせください。