製品概要
概要
The ST54J is a single-die solution integrating a contactless front-end (CLF) and a secure element called ST54J_CLF and ST54J_SE. It is designed for integration in mobile devices and NFC-compliant products.
The ST54J_CLF includes near-field communication (NFC) functions in the three operating modes: Card Emulation, Reader/Writer and Peer-to-Peer communication.
It is best in class in terms of RF output power (up to 2 W). With its outstanding output power and optimized efficiency, the ST54J driver can be connected to metal frame antennas. Thanks to improved low-power card detection sensitivity, in Reader/Writer mode, the ST54J_CLF operating in low-power mode is capable of detecting the presence of a card/tag from a distance greater than the Reader mode performance.
In Card Emulation mode, the ST54J_CLF is capable of operating without an external quartz or an external reference clock source, contributing to further reducing the current consumption of the system in low-power mode. Moreover, thanks to its improved field detection sensitivity, the ST54J_CLF is capable, in low-power mode, of detecting the presence of a reader RF field from a distance greater than the CE mode performance.
The ST54J_SE is a serial access microcontroller designed for secure mobile applications. It incorporates the most recent generation of Arm® processors for embedded secure systems. The SecurCore® SC300™ 32-bit RISC core is built on the Cortex®-M3 core, with additional security features to help protect against advanced forms of attacks.
-
特徴
-
- Single die integrating an NFC controller (contactless front-end – CLF) and a secure element (SE)
- Small WLCSP81 package, ECOPACK-compliant
- NFC controller
- Arm® Cortex®-M3 microcontroller
- 100% re-flashing capability for firmware update
- Enhanced active load modulation technology
- Enhanced TX drive up to 2 W with support of an external 5 V DC/DC converter for TX supply
- Optimized for extremely small or metal frame antennas
- Optimized power consumption modes
- Ultralow power Hibernate mode with selectable field detection for low-power mode support
- Proprietary In-Frame Synchronization (IFS) in Card Emulation (CE) to ensure stability in battery Low and Switched OFF modes
- System clock
- Fractional-N PLL input range of 13.56 to 76.8 MHz
- 27.12 MHz external crystal oscillator
- Automatic wakeup via communication interfaces, internal timers, GPIO, RF field or tag detection
- RF communications
- Active and passive Peer-to-Peer
- ISO/IEC 18092 – NFCIP-1 Initiator & Target
- Reader/Writer mode
- NFC Forum Type 1/2/3/4/5 tags
- ISO/IEC 15693
- MIFARE®
- FeliCa™
- Card Emulation mode
- ISO/IEC 14443 Type A & Type B
- FeliCa
- MIFARE
- Active and passive Peer-to-Peer
- External communication interfaces
- Two master SWP interfaces operating at up to 1.695 Mbit/s
- Slave I²C interface supporting Standard, Fast, Fast-mode Plus and High Speed modes
- Slave SPI interface up to 26 MHz
- ISO/IEC 7816-3 interface
- General-purpose inputs/outputs (GPIOs)
- Internal communication interfaces
- CLF/SE SWP interface
- 120 Mbit/s interprocessor communication (IPC) based on a shared internal memory
- Secure microcontroller
- Arm® SecurCore® SC300™ 32-bit RISC core cadenced at 100 MHz
- Up to 2048 Kbytes of user Flash memory
- 2 Kbytes of memory cache
- 64 Kbytes of user RAM
- Power saving Standby and Hibernate states
- Secure operating system
- Supports state of the art secure element operating systems:
- Java Card™ 3.0.5
- GlobalPlatform® 2.3 with Amdts
- EMVCo™ certification
- Security-certified according to CC EAL5+
- Hardware security-enhanced DES & AES accelerators
- MIFARE® Classic cryptography hardware accelerator
- NESCRYPT coprocessor for public key cryptography algorithm
- Supports state of the art secure element operating systems:
- Electrical characteristics
- Battery voltage support from 2.4 V to 5.0 V
- I/O dedicated voltage level (VPS_IO) from 1.62 V to 3.3 V
- Supports Class B and C operating conditions for UICC
- Ambient operating temperature −25 to + 85 °C
-
推奨コンテンツ
EDAシンボル / フットプリント / 3Dモデル
STMicroelectronics - ST54J
Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.
Please select one model supplier :
EDAシンボル
フットプリント
3Dモデル
品質 & 信頼性
| 製品型番 | マーケティング･ステータス | パッケージ | グレード | RoHSコンプライアンスグレード | 材料宣誓書** |
|---|---|---|---|---|---|
| ST54J-WLCSP | 量産中 | WLCSP | インダストリアル | N/A | |
ST54J-WLCSP
Package:
WLCSPMaterial Declaration**:
(**) st.comで提供している材料宣誓書は、パッケージ･ファミリ内で最も一般的に使用されているパッケージに基づく汎用ドキュメントの場合があります。そのため、特定の製品では100%正確ではない可能性があります。特定の製品情報については、セールスサポートまでお問い合わせください
サンプル & 購入
| 製品型番 | 製品ステータス | Budgetary Price (US$)*/Qty | STから購入 | Order from distributors | パッケージ | 梱包タイプ | RoHS | Country of Origin | ECCN (US) | ECCN (EU) | Operating Temperature (°C) (min) | Operating Temperature (°C) (max) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ST54J-WLCSP | | | distributors 販売代理店に在庫がない場合は、STのセールス･オフィスまでお問い合わせください |
ST54J-WLCSP 量産中
販売代理店に在庫がない場合は、STのセールス･オフィスまでお問い合わせください
（*）概算用の参考価格（US$）です。現地通貨でのお見積りについては、STのセールス･オフィスまたは販売代理店までお問い合わせください。