製品概要
概要
The VNQ6004SA-E is a device made using STMicroelectronics®VIPower®technology. It is intended for driving resistive or inductive loads directly connected to ground. The device is protected against voltage transient on VCCpin.
Programming, control and diagnostics are implemented via the SPI bus.
An analog current feedback for each channel is connected to the CURRENT-SENSE pin via a multiplexer. A CS_SYNC pin delivers a synchronous signal for sampling the current sense while the corresponding output is on.
The device detects open-load for both on and OFF-state conditions.
Real time diagnostic is available through the SPI bus (open-load, output short to VCC, over temperature, communication error, power limitation).
Output current limitation protects the device in an over load condition. The device can limit the dissipated power to a safe level up to thermal shutdown intervention. Thermal shutdown can be configured as latched off or with automatic restart.
The device enters a limp home mode in case of loss of digital supply (VDD), reset of digital memory or CSN monitoring time-out event. In this mode states of channel 0, 1, 2 or 3 are respectively controlled by four dedicated pins IN0, IN1, IN2 and IN3. Channel 0,1 can be programmed in BULB/LED mode.
-
特徴
- 一般
- 16-bit ST-SPI for full and diagnostic
- Programmable Bulb/LED mode for ch. 0–1
- Integrated PWM and phase shift generation unit
- 160 Hz internal PWM fallback frequency
- Advanced limp home functionalities for robust fail-safe system
- Very low standby current
- Optimized electromagnetic emissions
- Very low electromagnetic susceptibility
- In compliance with the 2002/95/EC
- Diagnostic functionalities
- Multiplex proportional load current sense
- Synchronous diagnostic of over load and short to GND, output shorted to VCC, ON-state and OFF-state open-load
- Programmable case over temperature warning
- Protection
- Load current limitation
- Self limiting of fast thermal transients
- Power limitation and over temperature shutdown (latching-off or auto restart)
- Undervoltage shutdown
- Overvoltage clamp
- Reverse battery protected through power outputs self turn-on (no external components)
- Load dump protected
- Protection against loss of ground
- 一般
EDAシンボル / フットプリント / 3Dモデル
STMicroelectronics - VNQ6004SA-E
Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.
Please select one model supplier :
EDAシンボル
フットプリント
3Dモデル
品質 & 信頼性
| 製品型番 | マーケティング･ステータス | パッケージ | グレード | RoHSコンプライアンスグレード | 材料宣誓書** |
|---|---|---|---|---|---|
| VNQ6004SATR-E | NRND | PWSSO 36 | オートモーティブ | Ecopack2 |
(**) st.comで提供している材料宣誓書は、パッケージ･ファミリ内で最も一般的に使用されているパッケージに基づく汎用ドキュメントの場合があります。そのため、特定の製品では100%正確ではない可能性があります。特定の製品情報については、セールスサポートまでお問い合わせください
サンプル & 購入
| 製品型番 | 製品ステータス | Budgetary Price (US$)*/Qty | STから購入 | Order from distributors | パッケージ | 梱包タイプ | RoHS | Country of Origin | ECCN (US) | ECCN (EU) | Operating Temperature (°C) (min) | Operating Temperature (°C) (max) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VNQ6004SATR-E | | | distributors 販売代理店に在庫がない場合は、STのセールス･オフィスまでお問い合わせください |
VNQ6004SATR-E NRND
販売代理店に在庫がない場合は、STのセールス･オフィスまでお問い合わせください
（*）概算用の参考価格（US$）です。現地通貨でのお見積りについては、STのセールス･オフィスまたは販売代理店までお問い合わせください。