ST25R3912

製品概要

概要

The ST25R3912 is a highly integrated NFC Initiator / HF Reader IC, including the analog front end (AFE) and a highly integrated data framing system for ISO 18092 (NFCIP-1) initiator, ISO 18092 (NFCIP-1) active target, ISO 14443A and B reader (including high bit rates), ISO 15693 reader and FeliCa™ reader. Implementation of other standard and custom protocols like MIFARE™ Classic is possible using the AFE and implementing framing in the external microcontroller (Stream and Transparent modes).

The ST25R3912 is positioned perfectly for the infrastructure side of the NFC system, where users need optimal RF performance and flexibility combined with low power.

The device is optimized for applications with directly driven antennas. The ST25R3912 is alone in the domain of HF reader ICs as it contains two differential low impedance (1 Ohm) antenna drivers.

The ST25R3912 includes several features that make it very suited for low power applications. The presence of a card can be detected by performing a measurement of amplitude or phase of signal on antenna LC tank, and comparing it to the stored reference. It also contain a low power RC oscillator and wake-up timer that can be used to wake up the system after a defined time period, and to check for the presence of a tag using one or more low power detection techniques (phase or amplitude).

The ST25R3912 is designed to operate from a wide (2.4 to 5.5 V) power supply range; peripheral interface IO pins support power supply range from 1.65 to 5.5 V.

特徴
ISO 18092 (NFCIP-1) Active P2P

ISO14443A, ISO14443B, ISO15693 and FeliCa™

Supports HBR up to 848 kbit/s PICC to PCD and PCD to PICC framing

Inductive sensing - Wake-up

Automatic modulation index adjustment

AM and PM (I/Q) demodulator channels with automatic selection

Up to 1 W in case of differential output

User selectable and automatic gain control
Transparent and Stream modes to implement MIFARE™ Classic compliant or other custom protocols

Possibility of driving two antennas in single ended mode

Oscillator input capable of operating with 13.56 or 27.12 MHz crystal with fast start-up

6 Mbit/s SPI with 96 bytes FIFO

Wide supply voltage range from 2.4 to 5.5 V

Wide temperature range: -40 °C to 125 °C

VFQFPN32, 5 mm x 5 mm package with wettable flanks

WLCSP, 3.0 mm x 2.8 mm package
続きを読む一部を表示

eDesignSuite

eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.

Choose design tool:

Power Management Design Center

Power Supply Design Tool

• SMPS design, by topology, by type and by product

• PFC design with analog and digitial control

• Supports various PCB configurations

Choose type:

DC/DC

AC/DC

太陽光発電システム

Power Management Design Center

LED Lighting Design Tool

• Handles AC-DC and DC-DC design in common topologies

• Displays interactive and annotated schematic

• Provides current/voltage graphs, Bode plots, efficiency curves and power-loss data

Choose type:

DC/DC

AC/DC

Power Management Design Center

Digital Power Workbench

• Provides a step-by-step optimized design of power section and control loop

• Generates the STM32Cube embedded software package for custom applications and allows firmware project generation, compatible with multiple STM32 IDEs

Power Management Design Center

Power Tree Designer

• Specify input/output power for each node in the tree

• Check for consistency

• Design each individual node

Choose design tool: