L3751

量産中
Education
MySTに保存する

Wide 6 V to 75 V input voltage synchronous buck controller

Download datasheet
Order Direct

製品概要

概要

The 6 V to 75 V wide input voltage range L3751 synchronous buck controller features extreme voltage conversion ratio over switching frequency range (100 kHz - 1 MHz) thanks to 40 ns minimum conduction time.

The diode emulation (DEM) implements pulse skipping mode that maximizes the efficiency at light-load giving controlled output voltage ripple. The forced PWM (FPWM) over the load range makes the switching frequency constant and minimizes the output voltage ripple.

The Power Good open collector output validates the regulated output voltage for monitoring and it is useful to implement output voltage sequencing for digital ICs during the power-up phase.

An embedded gate driver minimizes the number of external components and it is designed for standard VTH MOSFET.

Embedded protections–output overcurrent, input voltage UVLO, internal voltage monitoring, thermal shutdown - feature controlled and safe operation for critical environments in telecom, networking and industrial applications.

The device is available in a QFN 20 leads 3.5 x 4.5 mm package with wettable flanks.

  • 特徴

    • Wide 6 V to 75 V input voltage range
    • Adjustable output voltage from 0.8 V to 60 V
    • 100 kHz - 1 MHz switching frequency range
    • 40 ns minimum on-time for extreme duty ratio
    • Low dropout operation during line transient
    • Adjustable soft-start or input voltage tracking
    • Pulse skipping or forced PWM operation at light load
    • 同期化
    • Adjustable precision enable
    • Power Good open collector output validates VOUT
    • 7.5 V gate drivers for standard VTH MOSFETs
    • Constant current protection with hiccup mode
    • Precision or lossless programmable current sensing
    • Improved line transient response
    • Input voltage undervoltage lockout
    • Internal voltage monitoring
    • Thermal protection
    • Operating junction temperature range: -40 °C to 150 °C
    続きを読む 一部を表示

eDesignSuite

eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.

Power Management Design Center

Thermal-electrical Simulators for Components

Signal Conditioning Design Tool

NFC/RFID Calculators

Choose design tool:
Power Management Design Center

Power Supply Design Tool

• SMPS design, by topology, by type and by product
• PFC design with analog and digitial control
• Supports various PCB configurations
Choose type:
DC/DC
AC/DC
太陽光発電システム
Power Management Design Center

LED Lighting Design Tool

• Handles AC-DC and DC-DC design in common topologies
• Displays interactive and annotated schematic
• Provides current/voltage graphs, Bode plots, efficiency curves and power-loss data
Choose type:
DC/DC
AC/DC
Power Management Design Center

Digital Power Workbench

• Provides a step-by-step optimized design of power section and control loop
• Generates the STM32Cube embedded software package for custom applications and allows firmware project generation, compatible with multiple STM32 IDEs
Power Management Design Center

Power Tree Designer

• Specify input/output power for each node in the tree
• Check for consistency
• Design each individual node
Choose design tool:
Thermal-electrical Simulators for Components

AC Switches Simulator

• Select ratings and application waveforms
• Get junction temperature and blocking voltage graphs
• Search and sort suitable devices
Thermal-electrical Simulators for Components

Rectifier Diodes Simulator

• Select ratings and application waveforms
• Estimate power losses
• Search and sort suitable devices
Thermal-electrical Simulators for Components

STPOWER Studio

• Supports long mission profiles
• Provides power loss and temperature graphs
• Helps define heatsink thermal properties
Thermal-electrical Simulators for Components

Twister Sim

• Help select the right ViPOWER Automotive power device
• Supports load-compatibility, wiring harness optimization, fault condition impact and diagnostic analysis
• Supports various PCB configurations
Thermal-electrical Simulators for Components

TVS Simulator

• Specify system ratings and surge waveform
• Search and sort suitable devices
Thermal-electrical Simulators for Components

Estimate

• Build simple schematics and firmware inputs in minutes
• Quickly generate reliable estimates of battery life, system power consumption and bill of materials costs
Thermal-electrical Simulators for Components

PCB Thermal Simulator

• Thermal analysis of a PCB from Gerber files.
• Possibility to add heat sources, heat sinks, copper areas and thermal paths.
• Powerful server-side engine for rendering and simulation.
• Thermal results shown graphically via 2D table.
Choose design tool:
Signal Conditioning Design Tool

Active Filters

• Handles multi-stage-designs and common topologies
• Returns circuit component values
• Provides gain, phase and group delay graphs
• Low Pass, High Pass and Band Pass
Signal Conditioning Design Tool

Comparators

• Handles most common configurations
• Returns circuit components values
• Provides I/O signal waveforms
• Inverting, Non Inverting, Window
Signal Conditioning Design Tool

Low side Current Sensing

• Returns circuit component values
• Provides current error graphs
Signal Conditioning Design Tool

High side Current Sensing

• Provides current error graphs.
• Help to select the right High side current sensing and shunt devices.
Choose design tool:
NFC/RFID Calculators

NFC Inductance

• Input geometry and substrate properties
• Get antenna impedance
NFC/RFID Calculators

UHF Link Budget

• Enter forward and reverse link characteristics
• The tool returns link budget estimate
NFC/RFID Calculators

NFC Tuning Circuit

• Enter antenna parameter and matching target
• Select the topology of the matching network
• The tool returns component values for the desired design targets

おすすめ製品

STEVAL-L3751V12

STEVAL-L3751V12

STSW-eDSim

eDSim: fast and powerful electrical simulation software for SMPS and analog ICs

推奨コンテンツ

Technical Bulletin
L3751: Wide 6V to 75V Input Voltage Synchronous Buck Controller
Read more

すべてのリソース

すべてのカテゴリを表示
タイトル
バージョン
更新日

製品スペック (1)

タイトル
バージョン
更新日
DS13841 Wide 6 V to 75 V input voltage synchronous buck controller
4.0 30 Sep 2024
30 Sep 2024
DS13841 Wide 6 V to 75 V input voltage synchronous buck controller 4.0

テクニカル･ノート & 技術解説 (2)

タイトル
バージョン
更新日
TN1224 Mounting instructions for SMD (surface mounting device) packages
2.4 11 Jul 2023
11 Jul 2023
TN1224 Mounting instructions for SMD (surface mounting device) packages 2.4
ST Coilcraft L3751
1.0 02 May 2023
02 May 2023
ST Coilcraft L3751 1.0

プレゼンテーション (1)

タイトル
バージョン
更新日
Discover ST’s portfolio for signal conditioning, interface, and power management in wearables
2.2 02 Aug 2023
02 Aug 2023
Discover ST’s portfolio for signal conditioning, interface, and power management in wearables 2.2

フライヤー (2)

タイトル
バージョン
更新日
A6983I A6986I isolated DC-DC converters ICs
1.0 20 Nov 2024
20 Nov 2024
A6983I A6986I isolated DC-DC converters ICs 1.0
L6981/L6982/L6983 産業アプリケーション向け 同期整流式ステップダウン・コンバータ
1.0 19 Apr 2024
19 Apr 2024
L6981/L6982/L6983 産業アプリケーション向け 同期整流式ステップダウン・コンバータ 1.0

パンフレット (1)

タイトル
バージョン
更新日
DC-DCスイッチング・レギュレータ: クイック・リファレンス・ガイド
4.0 22 Mar 2023
22 Mar 2023
DC-DCスイッチング・レギュレータ: クイック・リファレンス・ガイド 4.0

EDAシンボル / フットプリント / 3Dモデル

STマイクロエレクトロニクス - L3751

Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.

Please select one model supplier :

Start your design with UltraLibrarian
Start your design with SamacSys
Symbols

EDAシンボル

Footprints

フットプリント

3D model

3Dモデル

すべてのリソース

タイトル
バージョン
更新日

SIMPLIS models (1)

タイトル
バージョン
更新日
L3751 SIMPLIS example schematics
2024.07 08 Jul 2024
08 Jul 2024
L3751 SIMPLIS example schematics 2024.07

品質 & 信頼性

製品型番 マーケティング･ステータス パッケージ グレード RoHSコンプライアンスグレード 材料宣誓書**
L3751PUR
量産中
QFN 3.5X4.5X1.0 20L PITCH 0.50 インダストリアル Ecopack2

L3751PUR

Package:

QFN 3.5X4.5X1.0 20L PITCH 0.50

Material Declaration**:

PDF XML
More Info

Marketing Status

量産中

Package

QFN 3.5X4.5X1.0 20L PITCH 0.50

Grade

Industrial

RoHS Compliance Grade

Ecopack2

(**) st.comで提供している材料宣誓書は、パッケージ･ファミリ内で最も一般的に使用されているパッケージに基づく汎用ドキュメントの場合があります。そのため、特定の製品では100%正確ではない可能性があります。特定の製品情報については、セールスサポートまでお問い合わせください

サンプル & 購入

（*）概算用の参考価格（US$）です。現地通貨でのお見積りについては、STのセールス･オフィスまたは販売代理店までお問い合わせください。

製品

検索履歴

ブックマーク

Please log in  to show your saved searches.

▼
戻る
戻る
戻る

ご存知でしたか？

Please provide email

Please enter code

Congratulations!

Simple subscription

Congratulations!

x

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

Invalid code, please check the code sent to your email address and validate again. In case you did not receive any code please select 'I did not receive code'

You can start following this product to receive updates when new Resources, Tools and SW become available. It's easy and takes only 1 minute. ja

お客様のプロフィール情報をSTが処理する方法、及びお客様の個人データ保護の権利を行使する方法について説明した、STのプライバシー･ステートメントをご確認ください。

以下の製品のお知らせを受け取れます
- L3751

You can re-use the validation code to subscribe to another product or application.

Sorry, there was a problem on our servers. Please try again.