STM32C0316-DK

批量生产

采用STM32C031C6 MCU的探索套件

下载数据摘要 Order Direct

产品概述

主要优势

向其他平台开放

  • 专为不同STM32C0和STM32G0之间的引脚兼容性设计
  • LQFP48至DIP28引脚排列转换器,兼容原始Arduino Uno 8位MCU

灵活性高且经济实惠的迷你评估板

该这款开发板支持2.0 V至3.6 V的全电压范围,可适应任何拓扑结构。

独立、快速的STLINK-V3MINIE

利用功能完善的STLINK-V3MINIE进行调试,可通过其他STM32 MCU重复使用。

描述

STM32C0316-DK探索套件旨在为相应的NUCLEO-C031C6板提供替代功能。

用户可以访问全部STM32C0系列微控制器通用的20种引脚,还可以通过断开调试工具来覆盖SWD调试引脚。用户可以用滑动开关覆盖5向模拟摇杆开关和LED,对其进行接管。所有引脚都可以通过DIP28连接器访问。未提供插针,以便用户自行选择想要的插针类型。可以用滑动开关切断用于RTC的32768 Hz板载1引脚时钟发生器。

该套件可以从8位微控制器迁移到STM32C0系列微控制器,以及在STM32C0系列和STM32G0系列微控制器之间迁移。DIP28引脚排列的设计初衷是尽可能与ATMEGA328 8位微控制器兼容。LQFP48封装与STM32G031/071/0B1系列微控制器兼容。UFQFPN20封装与STM32C01系列微控制器兼容。WLCSP20封装与STM32G051系列微控制器兼容。

STM32C031C6系列微控制器可以在其工作范围内进行测试。当其源电压低于3.3 V时,5.0到3.3 V的稳压器会自动绕过自身。调试工具电平转换器将调试信号电平调整为目标微控制器的供电电压。

  • 所有功能

    • STM32C031C6 Arm® Cortex®‑M0+核心微控制器,具有32 KB Flash存储器和12 KB RAM,采用LQFP48封装
    • 板件参考设计三种STM32封装:LQFP48、UFQFPN20和WLCSP20
    • 32768 Hz板载时钟发生器
    • 1个用户LED和2个功率LED
    • 复位按钮
    • 使用单个ADC输入引脚的5向摇杆
    • 使用滑动开关快速断开嵌入式用户演示元件
    • 板连接器:
      • 用于5 V电源的USB Micro-B
      • STMod+连接器
      • 将蓝牙®(HC05,115200 bps)用作简单的无线串行适配器
      • 未安装的DIP28兼容扩展连接器
      • 适用于第三方调试工具的STDC14调试连接器
      • 板载双面焊盘,适用于BTB卡边缘连接器
      • 面向STM32微控制器的独立式STLINK-V3MINIE调试/编程小型探头
    • STM32Cube MCU软件包提供全面的免费软件库和示例
    • 支持多种集成开发环境 (IDE),包括IAR Embedded Workbench®、MDK-ARM,以及STM32CubeIDE

您可能还会喜欢...

利用STM32C0 MOOC设计您的下一个
8/16位应用!
参与专门的在线培训,
充分利用STM32C0!
入门级32位MCU,成本敏感型应用的理想之选

The current status of a product:
Active: Product is in volume production
Evaluation: Product is under characterization. Limited Engineering samples available
Preview: Product is in design stage
Target: Product is in design feasibility stage.No commitment taken to produce
Proposal: Marketing proposal for customer feedback.No commitment taken to design or produce
NRND: Not Recommended for New Design.Product is in volume production only to support customers ongoing production.
The RoHS status of a product:
ECOPACK 1: Initial grade to identify European RoHS compliant products.
ECOPACK 2: New grade to identify brominated chlorinated and antimony oxide flame retardant free products.
ECOPACK 3: Halogen free RoHS exemptions free products.
(*): ECOPACK 2 version available upon request.
(**): Some versions still existing in ECOPACK 1 or not compliant.
The current status of a product:
Active: Product is in volume production
Evaluation: Product is under characterization. Limited Engineering samples available
Preview: Product is in design stage
Target: Product is in design feasibility stage.No commitment taken to produce
Proposal: Marketing proposal for customer feedback.No commitment taken to design or produce
NRND: Not Recommended for New Design.Product is in volume production only to support customers ongoing production.
Budgetary PriceMain country of assembly or fabrication of the product.ECCNs are five character alpha-numeric designations used on the Commerce Control List to identify dual-use items for export control purposes. ECCNs are five character alpha-numeric designations used on the Commerce Control List to identify dual-use items for export control purposes.